About the Sennheiser Vocal Set
Simplify your setup
Simplify your setup
Sennheiser created the XSW-D series as a small, lightweight, easy-to-use solution for speakers and vocalists who want the flexibility of wireless without the hassle and expense of a big, bulky transmitter and receiver. The XSW-D Vocal Set gives you a small, lightweight, easy-to-use system that simplifies your setup.
Light and compact
The Vocal Set features compact, lightweight transmitter and receiver modules that are simple to set up. The modules are paired at the factory, so they're ready to go as soon as you power them up, and fit easily into your equipment case. You can have up to four transmitters paired to the receiver simultaneously (note: only one transmitter can be used at a time).
The Vocal Set's XS 1 cardioid dynamic microphone connects directly to the transmitter's standard 3-pin XLR connector. Its companion receiver plugs into your mixer channel's XLR input. The transmitter and receiver are powered by internal lithium-ion batteries with up to five hours of battery life per charge; you recharge the batteries with the included USB-A to USB-C cable. A single control button serves as an on/off switch and also allows you to mute either module, while the microphone also features an on/off switch.
The system uses a 2.4 GHz connection for crystal-clear sound quality with a range of up to 250 feet, giving you plenty of room to work. Give yourself the freedom and simplicity of a truly compact wireless system with the Vocal Set.
- digital wireless microphone system with cardioid dynamic microphone
- package includes female transmitter, male receiver, microphone, mic clip, and USB-A to USB-C charging cable
- receiver connects to mixers with XLR input
- transmitter plugs into microphone's XLR connector
- operating range: 250 feet (line of sight)
- operates on 2.4 GHz frequency band
- built-in Li-Ion batteries with up to 5 hours life per charge
- transmitter: 4-1/16"L x 1"W x 1-1/8" D
- receiver: 7/8"W x 1"H x 4-1/4"D
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # 508484
What's in the box:
- XS-1 Microphone
- One TX XLR Transmitter (female XLR jack)
- One RX XLR Receiver (male XLR jack)
- Microphone stand-adapter (5/8" thread)
- 5/8" to 3/8" Thread-adapter (pre-installed in stand-adapter)
- 40" USB cable (Type-A on one end / type-C on other end / 2.0)
- Quick guide
- Safety instructions
- Multi-colored labels
Thanks for submitting your review
More details on the Sennheiser Vocal Set
Overview: The Sennheiser XSW-D Vocal Set features a wireless transmitter and receiver, both with XLR connectors, for wireless signal transmission for the included XS-1 dynamic microphone. The Vocal Set is ideal for singers, live presentations, speeches, and lectures. The XSW-D Vocal Set works on a 2.4GHz wireless transmission signal.
XS-1 Microphone: The XSW-D Vocal Set includes a Sennheiser XS-1 hand-held dynamic microphone for live use. The mic features a cardioid polar pattern and includes an On/Off switch. Connection to the mic is done through a standard male XLR jack.
TX XLR Transmitter: The included wireless transmitter features a female XLR socket for direct attachement to the base of the XS-1 dynamic microphone (not included) for recording from the mic.
RX XLR Receiver: A receiver module is included with a male XLR jack for connection to the audio input on an audio mixer, PA system, or recording device. Operational range between transmitters and receiver is up to 250 ft. (under optimal conditions).
Power Button: Both the Transmitter and the Receiver modules include a Power button for powering them on/off. When first powered on, each will display the current battery charge level for that device. Once powered on, a single press of the Power button will Mute the transmitted signal.
Charging: Both the transmitter and the receiver feature an internal 3.7V Lithium-Ion rechargeable battery and a USB-C port for charging the battery. Battery capacity is 850mAh providing operation time of up to 5 hrs. Typical charging time for a depleted battery is approx. 3 hrs. A 40" USB cable is included for charging (Type-A to type-C, 2.0). Both transmitters and receiver have an LED status indicator that will provide the approximate remaining battery charge with the following indications:
- Solid Green: 100%
- Flashing Green: >75%
- Flashing Yellow: 5% - 75%
- Flashing Red: <5%
Pairing: Both the transmitter and receiver in the set are pre-paired at the factory and are ready for immediate use. A wireless 2.4GHz connection is established once the transmitter and receiver are switched on and within range of each other. Up to 4 transmitters can be paired to a receiver, but only one can be used at a time. The other transmitters must be switched off in the meantime.