About the NavAtlas PTS1
Start your powersport vehicle without a key
Start your powersport vehicle without a key
The NavAtlas PTS1 push-to-start kit makes it easy to hop into your ATV, side-by-side, or other vehicle, and get going without pausing to locate, insert, and turn a key. This handy package includes a sleek button with red LED, a pair of smart key fobs, and a smart module which connects the button with your vehicle's battery. With this system in place, you just need to hit the button to be off and running.
Works with a wide array of vehicles
The PTS1's compatible with a large swath of recreational vehicles, whether you're going on the road, across the trail, or over the water. It can work with 5-volt, 12-volt, and 24-volt systems, and functions in extreme cold or heat. The button's locking band makes installation convenient and trustworthy, and the module's small enough to fit in most dash compartments.
Two fabulous fobs
The smart key fobs each include a lithium battery and offer a sensing range of approximately 5 feet. You can choose to store a fob on your ride or just bring it with you when you're ready for excitement. And since the PTS1 won't start without a fob, it adds a layer of security to your vehicle.
Product highlights:
- push-to-start kit for powersports vehicles
- includes smart module, controller, button with red LED, and two smart key fobs (with lithium batteries)
- compatible with 5-volt, 12-volt, and 24-volt battery systems
- key fob effective range up to 1.5 meters
- operating temperature range: minus 20°C to 80°C
- smart module dimensions: 3-1/4"W x 1-1/4"W x 4"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # PTS1
What's in the box:
- Push-to-start smart module (attached wiring harness)
- Push-to-start controller
- Push-to-start button (attached 12" harness)
- 2 FOB keys (CR2032 battery installed)
- Installation/Owner's Manual
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the NavAtlas PTS1
Product Research
Features
Universal Smart Push-to-Start Kit: The NavAtlas PTS1 is a universal smart push-to-start kit for UTVs & ATVs (works with 5V, 12, & 24V systems). The kit includes a module with wiring harness, control box, push-to-start button, and two FOB keys.
Installation & Wiring: The included module is equipped with three attached harnesses. Two of the harness feature molex connectors on the end; one plugs into the control box and the other into the harness of the push-to-start button. The other harness is terminated with 5 wires - 12V Battery (Red), Ground (Black), Accessory (Orange), 12V Safety Brake (Blue), and Engine Start (Yellow). All of the wires are terminated by a male quick-slide terminal (except for the Ground wire which has a male spade connector).
Push-to-Start Button: When the push-to-start button is pressed more than 1 seconds with one of the FOB keys in range of the control box, your UTV or ATV's engine will turn on or off. If you press the push-to-start button down for less than 1 second, only Accessory will turn on/off. Pressing down the push-to-start button for more than 2 seconds stops the engine immediately.
Note: When the FOB key is not available or is broken suddenly while engine is starting, pressing the push-to-start button for more than 5 seconds will force to turn off start power of engine.
FOB Keys: The FOB keys have a wireless range of approximately 4.9' to the module and control box. Each FOB key operates on a single CR2032 3V "coin" type battery (pre-installed). The battery should last approximately 2 to 3 years. The batteries are replaceable.
- Module: 3.25" (w) x 1.25" (h) x 4.0" (d)
- Controller: 3.25" (w) x 1.25" (h) x 4.0" (d)
- FOB Keys: 1.625" (w) x 0.5" (h) x 3.375" (d)
- Push-to-Start Button: 1.125" (diameter) x 0.875" (deep); requires a 1" round cutout with a mounting depth of 0.75".
Loading accessories...
Customer Q&A
Loading articles...
