About the Garmin Montana Motorcycle/ATV Mount Kit
Mount your Garmin Montana to your motorcycle or ATV
You can take advantage of the Garmin Montana GPS handheld's great guidance on your motorcycle, ATV, UTV, side-by-side, or other powersports vehicle — but you should probably mount it correctly first. This motorcycle/ATV mount kit includes a rugged cradle, hardware, AMPS arm/ball socket, and cable with bare power, audio, and data wires. Mount your Montana (portrait mode recommended for the 700i and 750i) securely on your handlebar and you're ready for adventure. Compatible devices include the Montana 700, 700i, and 750i. Warranty: 1 year.
What's in the box:
- Cradle for Montana 700 series navigator with attached 74" power cable (in-line 3A ATM mini-fuse) and audio cable (3.5mm jack)
- Security screw tool
- Four M4 x 20mm panhead screws
- 4 Flat washers
- 4 M4 Nylock nuts
- Mounting plate with 1" ball and AMPS bolt pattern
- Handlebar Base with 1" ball
- Double-socket arm
- Two M6 x 55mm bolts
- Two 1/4"-20 x 2" bolts
- 2 Plastic spacers
- 2 Split lock washers
- 2 Nylock washers
- 2 Rubber bolt tip covers
Garmin Montana Motorcycle/ATV Mount Kit reviews
Thanks for submitting your review
More details on the Garmin Montana Motorcycle/ATV Mount Kit
Overview: The Garmin Montana 700-series handheld GPS navigators can be mounted in several different vehicles. This mount (010-12881-03) lets you install the device on the handlebars of a motorcycle or all-terrain vehicle (ATV). The mount includes a cradle that rotates for viewing the screen in portrait or landscape orientation. The attached power cable supplies 12-volt power, ground, and serial data connections, plus an audio jack.
Mounting Options: The Motorcycle/ATV mount includes hardware for two installation options. One option is to mount the handlebar base to the handlebar tubing with a U-bolt. The other option mounts the handlebar base to the clutch-clamp or brake-clamp bracket. Both 1/4-inch and M6 bolts are included to match the size of the factory bolts on your vehicle's clutch-clamp or brake-clamp.
Ball-style Mounting System: The Motorcycle/ATV mount features a ball-style mounting system, which provides enough flexibility to pivot, swivel, or rotate the device for the best possible viewing position. Both the handlebar base and base plate have a 1" ball swivel. The included double-socket arm accommodates both ball swivels, and lets you adjust the position of the Montana device in virtually any direction. The base plate's standard rectangular AMPS bolt pattern is 1.118" x 1.5" (30mm x 38mm), and matches the bolt pattern on the back of the Montana mount's cradle. Hardware to attach the cradle to the base plate is included.
Security Screw: The mounting cradle is equipped with a T-10 Torx security screw to help prevent theft of the device. A Torx security tool is included for tightening or loosening the security screw.
Wiring Harness: The mounting cradle has an attached 74" cable for hardwiring the mount to the motorcycle/ATV's wiring. The cradle's 6 pins match the metal contacts on the back of the Montana device. When the device is not connected to the cradle, a rubber cover is provided for protecting the cradle's contact pins from the elements. The wiring harness has the following wire connections:
- Red: Power (+) (has an inline 3A ATM mini-fuse)
- Black: Ground (-)
- Yellow: Serial data input
- Blue: Serial data output
- Green: Serial ground wire
- Audio Jack: female 3.5mm connector
Note: The wires should not be run near high-heat sources.
- Fuse: 3A
- Input Voltage: 10-30 Volts
- Input Current: 1.5A Max.
- Input Current w/o device installed: 0.5 mA Max.
- Operating Temperature Range: -4° to 140°F (-20° to 60°C)