About the Garmin Parking Mode Cable
Access Parking Mode
Garmin's ultra-compact Dash Cam 45, 55, and 65 are already tidy security solutions for your vehicle, but this hardwire kit gives you the tools to achieve a very clean-looking installation. You'll gain constant power and access to Parking Mode which uses your Garmin Dash Cam's built-in motion detection to monitor your vehicle when it is turned off and parked.
- hardwire kit for permanent installation of Garmin Dash Cam 45, 55, and 65
- enables compatible Dash Cam's Parking Mode
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 010-12530-03
What's in the box:
- Parking Mode cable for Garmin Dash Cam (with right-angled Micro-B USB plug on one end and 3 bare wires (Batt/ACC/Ground) on other end)
- Wire color code sheet
Garmin Parking Mode Cable reviews
Thanks for submitting your review
More details on the Garmin Parking Mode Cable
Overview: This Parking Mode Cable is designed for use with Garmin Dash Cam 45, 46, 55, 56, 65W, and 66W, providing power to the Dash Cam when the vehicle's ignition switch is turned off. You can also use the cable to hard wire the Dash Cam into your vehicle's electrical system, preventing the need for the supplied cable and using one of your vehicle's 12V power ports.
Parking Mode: The Dash Cam records video while you're driving down the road. It can also keep an eye on your vehicle when you're parked. When activated, the Dash Cam will start recording when the camera sensor detects motion.
Dimensions: The Parking Mode Cable features a 1-7/8" x 1-5/8" x 7/8" module with cables coming out each end. On the vehicle end, the 38" cable terminates into separate constant power (yellow), switched power (red), and ground (black) wires. The ground wire has a spade connector on the end. On the Dash Cam side, the 10' cable features a Micro-B USB connector that plugs into the side of the camera.
Q Crutchfield asked: Why did you buy this?