Skip Navigation

PowerBass L2-693

6"x9" 3-way car speakers — designed to replace 2-ohm factory speakers

1 Review

Find what fits your vehicle

 
 
 
 

Can't find your exact vehicle?

Item # 151L2693

Out of Stock

Expected: 3/29/2019 Reserve risk-free

 Ships FREE

Add to Cart

Earn up to 90 Rewards points

Ask an expert

Our VA-based experts can help.

1.888.955.6000

Chat

Overview

Our take on the PowerBass L2-693

Some cars use low-impedance speakers to get a little more punch out of the factory radio. If you try to replace these speakers with standard 4-ohm aftermarket speakers, you'll notice a significant loss of volume — never a good thing — while 2-ohm replacement speakers have always been hard to find. Until now....

Replacement speakers for your 2-ohm factory system

Some cars use low-impedance speakers to get a little more punch out of the factory radio. If you try to replace these speakers with standard 4-ohm aftermarket speakers, you'll notice a significant loss of volume — never a good thing — while 2-ohm replacement speakers have always been hard to find. Until now....

These specially designed PowerBass L Series 2-ohm speakers will make the most of your factory power. Install these L2-693 6"x9" 3-way car speakers, and you'll hear a big improvement in sound quality over your old factory speakers. Plus, their shallow mounting depth ensures they're a fit in a wide variety of vehicles too.

Step up to aftermarket quality

Say goodbye to flimsy factory woofers and whizzer cones. The sturdy yet sensitive polypropylene/carbon fiber woofer and butyl rubber surround deliver satisfying midbass while enduring the extreme temperatures of life in your car doors. The 2" Mylar dome midrange driver and 3/4" aluminum alloy dome tweeter bring the high range to life with the crisp detail that's been missing from your factory sound. Those highs are enhanced with a Wave Guide Lens that directs highs toward your ears for better stereo imaging and soundstaging. 

Note: PowerBass designed these speakers for use with a 2-ohm factory system. Call an advisor to confirm compatibility with your vehicle. 

Product Highlights:

  • 3-way car speakers
  • designed to replace 2-ohm factory speakers — please call to confirm compatibility with your vehicle
  • 6"x9" injection molded polypropylene/carbon fiber woofer cone with butyl rubber surround
  • 2" Mylar dome midrange driver and 3/4" aluminum alloy dome tweeter
  • handles up to 50 watts RMS (150 watts peak power)
  • frequency range: 43-21,000 Hz
  • sensitivity: 91 dB
  • top-mount depth: 3-1/4"
  • impedance: 2 ohms
  • grilles included
  • warranty: 1 year
  • Our 60-day money-back guarantee

What's in the Box:

  • Two 3-way speakers
  • 2 Grilles
  • 2 Grille frames
  • Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
  • Eight 1-1/8" Screws
  • 8 Speed clips
  • 4 Red plastic wire caps
  • Grille putty
  • Application guide
  • Template
  • powerbass Facebook page note
  • Window sticker
Reviews

PowerBass L2-693 Reviews

Average Customer Review(s):

(1 Review)

Heavy Duty speakers

David V from Schertz, TX on 10/22/2017

Crutchfield Customer Review (What's this?)

These speakers sound better than I expected. I can tell by the size of the magnets these are no joke. Very solid. And the best part is that they're 2ohm so they get extra power out of you amp as long as the amp is rated to handle 2ohms. I tried them on the front 2 channels of a new Bluetooth JVC deck at 22w rms per channel and deck handled it fine. (I would NOT connect 4 though, since all headunits are only supposed to go down to 4 ohms per channel.) Get an amp for these. I ended up putting these in an ice chest with a Bluetooth amp.

Pros: Price 2ohm Bass Big tweeter

Cons: Grill does not stay on super tight, comes off easily.

Details

Hands-on research

Features and Specs

General
Speaker Size 6x9
Design 3-way
Tweeter Design 3/4" Dome
Impedance (Ohms) 2
Tweeter Composition Aluminum
Woofer Composition Injected-Molded Polypropylene/
Woofer Surround Butyl Rubber
Parts Warranty 1 Year
Labor Warranty 1 Year
Specifications
Sensitivity (1W at 1 meter) 91
Sensitivity at 2.83 volts N/A
Frequency Response 43 - 21k Hz
Minimum RMS Wattage ---
Maximum RMS Wattage 100
Peak Power Handling (Watts) 300
Top-mount Depth (Inches) 3 3/8
Bottom-mount Depth (Inches) 3 5/8
Cutout Diameter or Length (inches) 0

Product Research

Features

Application: On their website, PowerBass notes the L-Series speakers are not designed for use with aftermarket head units or amplifiers. However, if an amplifier is 2Ω stable, with appropriate output power, the speakers are compatible.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Articles

Searches related to the PowerBass L2-693 6"x9" 3-way car speakers — designed to replace 2-ohm factory speakers