About the PowerBass OE65C-FD
The perfect components for your Ford or Lincoln
The perfect components for your Ford or Lincoln
If you like your factory radio just fine but know there's still room to improve the audio in your car, then PowerBass' vehicle-specific speakers are a great way to step up the sound in select Ford and Lincoln vehicles. This specially designed 6-1/2" component speaker system features woofers that are a perfect fit for your factory locations and bracketed tweeters that take the headache out of installation. PowerBass also makes things easier by equipping these speakers with factory-compatible wiring harnesses.
Better quality materials means better sound
Say goodbye to flimsy factory woofers and whizzer cones. A sturdy yet sensitive injection-molded polypropylene woofer cone delivers the goods in the low frequencies while enduring the extreme temperatures of life in your car door. A 1" silk dome tweeter gives you smooth highs and all the detail you've been craving from your factory sound. PowerBass uses an inline crossover to ensure the tweeter isn't burdened with playing any low frequencies. These speakers will work great with your Ford radio, but you can get even better performance by powering them with up to 60 watts RMS from an outboard amplifier.
Product highlights:
- Featured in our article: Ten best component car speakers for 2023
- vehicle-specific component speaker system includes two woofers and two tweeters
- 6-1/2" molded polypropylene woofer cone
- 1" silk dome tweeter with inline crossover
- designed to fit in select Ford and Lincoln vehicles
- vehicle-specific installation gear and wiring adapters included
- works with factory radio, aftermarket stereo, or amplifier
- handles up to 60 watts RMS (120 watts peak)
- frequency response: 70-20,000 Hz
- impedance: 4 ohms
- sensitivity: 88 dB
- woofer mounting depth: 1-5/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # OE65C-FD
What's in the box:
PowerBass OE65C-FD owner's manual
- 2 Woofers
- 2 Tweeters (each with 3" wire attached)
- 2 Tweeter mounting brackets
- 2 Factory tweeter wire adapters
- Two M5x6mm Machine screws
- Eight 3/4" Screws
- Two 10" Woofer wire extensions
- Installation instructions/ Application guide
- powerbass social media card
- Window sticker
Reviews
Customer reviews
Loading reviews...
PowerBass OE65C-FD reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the PowerBass OE65C-FD
Features & specs
| General | ||
|---|---|---|
| Speaker Size | Vehicle-specific | |
| Design | 2-way | |
| Tweeter Design | 1" Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Silk | |
| Woofer Composition | Polypropylene | |
| Woofer Surround | Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 88 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 70 - 20k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 60 | |
| Peak Power Handling (Watts) | 120 | |
| Top-mount Depth (Inches) | 1 11/16 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 4 7/8 | |
| Mounting Height (Inches) | 1.02 | |
Product Research
Features
Wiring: In most installations the OE65C-FD is designed for, the factory wiring harness plugs directly into the woofer frame and the included tweeter adapters. In the cases where that's not possible for the woofer, a 10" wire extension is included. The extension also plugs into the factory wiring harness.
Fit: The OE65C-FD is designed as a direct replacement for select Ford and Lincoln vehicles. Please enter your vehicle information to confirm fit.
Tweeter: Because the tweeters include no grilles, the OE65C-FD should only be installed in applications where there is a factory tweeter (with a grille).
Loading accessories...
Customer Q&A
3 questions already asked
Loading articles...
Great sound and was easy to install. I'm not very mechanically inclined but with the aid of the instructions from Crutchfield I was able to do it and turned out great
Eugene from Bells, TX