About the PowerBass OE692-FD
Designed to work in your Ford
Designed to work in your Ford
If you like your factory radio just fine but know there's still room to improve the audio in your car, then PowerBass' vehicle-specific speakers are a great way to step up the sound in select Ford vehicles. These specially designed 6"x9" 2-way car speakers are the perfect fit for your factory locations, which will take some of the sweat of out of installation. PowerBass also makes things easier by equipping these speakers with factory-compatible wiring harnesses.
Step up to PowerBass
Say goodbye to flimsy factory woofers and whizzer cones. A sturdy yet sensitive injection-molded polypropylene woofer cone delivers the goods in the low frequencies while enduring the extreme temperatures of life in your car door. A 1" silk dome tweeter gives you smooth highs and all the detail you've been craving from your factory system.
- 2-way car speakers
- 6"x9" injection-molded polypropylene woofer cone
- 1" silk dome tweeter
- designed to fit in select Ford vehicles
- works with factory radio, aftermarket stereo, or amplifier
- handles up to 80 watts RMS (160 watts peak)
- frequency response: 65-20,000 Hz
- impedance: 4 ohms
- sensitivity: 89 dB
- mounting depth: 1-7/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # OE692-FD
What's in the box:
- Two 2-way speakers
- Two 10" Wire extensions
- Eight 3/4" Hex head screws
- Application guide
- powerbass Facebook page note
- Window sticker
PowerBass OE692-FD reviews
Great product and price!
0 of 0 found this helpful
Great improvement over stock speakers! I didn't want to use adapter brackets or wiring adapters, I wanted a speaker that would bolt right into the original speaker hole and line up with the bolt holes and use my original speaker wire harness and these worked great, fit was perfect and to my ears they sound great. I would highly recommend these if you want simplicity of installation, and the included directions for door panel removal were extremely helpful as well!
Pros: Direct fit no adapters needed.
14 of 14 found this helpful
More details on the PowerBass OE692-FD
Features & specs
|Tweeter Design||1" Dome|
|Woofer Composition||Injection Molded Polypropylene|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||89|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||65 - 20k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||80|
|Peak Power Handling (Watts)||160|
|Top-mount Depth (Inches)||1 3/4|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||0|
Wiring: In most installations the OE692-FD is designed for, the factory wiring harness plugs directly into the speaker frame. In the cases where that's not possible, a 10" wire extension is included. The extension also plugs into the factory wiring harness.
Fit: The OE692-FD is designed as a plug and play replacement for select Ford and Lincoln vehicles. Please enter your vehicle information to confirm fit.