About the PowerBass OE69C-FD
The perfect components for your Ford
The perfect components for your Ford
If you like your factory radio just fine but know there's still room to improve the audio in your car, then PowerBass' vehicle-specific speakers are a great way to step up the sound in select Ford vehicles. This specially designed 6"x9" component speaker system features woofers that are a perfect fit for your factory locations and bracketed tweeters that take the headache out of installation. PowerBass also makes things easier by equipping these speakers with factory-compatible wiring harnesses.
Better quality materials means better sound
Say goodbye to flimsy factory woofers and whizzer cones. A sturdy yet sensitive injection-molded polypropylene woofer cone delivers the goods in the low frequencies while enduring the extreme temperatures of life in your car door. A 1" titanium inverted dome tweeter gives you smooth highs and all the detail you've been craving from your factory sound. PowerBass uses an inline crossover to ensure the tweeter isn't burdened with playing any low frequencies. These speakers will work great with your Ford radio, but you can get even better performance by powering them with up to 80 watts RMS from an outboard amplifier.
- vehicle-specific component speaker system includes two woofers and two tweeters
- 6"x9" molded polypropylene woofer cone
- 1" titanium inverted dome tweeter with inline crossover
- designed to fit in select Ford vehicles
- vehicle-specific installation gear and wiring adapters included
- works with factory radio, aftermarket stereo, or amplifier
- handles up to 80 watts RMS (160 watts peak)
- frequency response: 65-20,000 Hz
- impedance: 4 ohms
- sensitivity: 89 dB
- woofer mounting depth: 1-7/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # OE69C-FD
What's in the box:
- 2 Woofers
- 2 Tweeters (each with 3" wire attached)
- 2 Tweeter mounting brackets
- 2 Factory tweeter wire adapters
- Two M5x6mm Machine screws
- Eight 3/4" Screws
- Two 10" Woofer wire extensions
- Installation instructions/ Application guide
- powerbass social media card
- Window sticker
PowerBass OE69C-FD reviews
A definite improvement over stock. I purchased these for my 2019 ford f150 XL. I also got the KTP 445U amplifier with a harness from a@#$^n.com that made it plug and play. I purchased some kenwoods 6.5's for the rear doors. I wanted to try these with the included tweeters.
Pros: Improved clarity, better bass
Cons: not a quantum leap, truck still needs a sub to get full potential as the cab spaces is large. On a smaller Ford (Edge, Explorer, etc) I think these would be great.
1 of 1 found this helpful
More details on the PowerBass OE69C-FD
Features & specs
|Tweeter Design||1" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||89|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||65 - 20k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||80|
|Peak Power Handling (Watts)||160|
|Top-mount Depth (Inches)||1 13/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||0|
Wiring: In most installations the OE69C-FD is designed for, the factory wiring harness plugs directly into the woofer frame and the included tweeter adapters. In the cases where that's not possible for the woofer, a 10" wire extension is included. The extension also plugs into the factory wiring harness.
Fit: The OE69C-FD is designed as a direct replacement for select Ford and Lincoln vehicles. Please enter your vehicle information to confirm fit.
Tweeter: Because the tweeters include no grilles, the OE69C-FD should only be installed in applications where there is a factory tweeter (with a grille).