About the PowerBass OE69C-TY
The perfect components for your Toyota, Lexus, and Scion
The perfect components for your Toyota, Lexus, and Scion
If you like your factory radio just fine (like I do) but know there's still room to improve the audio in your car (count me in there too), then PowerBass' vehicle-specific speakers are a great way to step up the sound in select Toyota, Lexus, and Scion vehicles. This specially designed 6"x9" component speaker system features woofers that are a perfect fit for your factory locations and bracketed tweeters that take the headache out of installation. PowerBass also makes things easier by equipping these speakers with factory-compatible wiring harnesses.
Better quality materials means better sound
Say goodbye to flimsy factory woofers and whizzer cones. A sturdy yet sensitive injection-molded polypropylene woofer cone delivers the goods in the low frequencies while enduring the extreme temperatures of life in your car door. A 1" titanium inverted dome tweeter gives you smooth highs and all the detail you've been craving from your factory sound. PowerBass uses an inline crossover to ensure the tweeter isn't burdened with playing any low frequencies.
Grilles are not included; the factory grilles should be suitable for most applications.
Highlights:
- vehicle-specific component speaker system includes two woofers and two tweeters
- 6"x9" molded polypropylene woofer cone
- 1" titanium inverted dome tweeter with inline crossover
- designed to fit in select Toyota, Lexus, and Scion vehicles
- works with factory radio, aftermarket stereo, or amplifier
- handles up to 80 watts RMS (160 watts peak)
- frequency response: 65-20,000 Hz
- impedance: 4 ohms
- sensitivity: 89 dB
- woofer mounting depth: 1-7/8"
- vehicle-specific installation gear and wiring adapters included
- grilles not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # OE69C-TY
What's in the box:
PowerBass OE69C-TY owner's manual
- 2 Woofers
- 2 Tweeters (each with 3" wire attached)
- 2 Tweeter mounting brackets
- 2 Tweeter clamps
- 4 Factory tweeter wire adapters (2 each of 2 types)
- 4 Machine screws
- 8 Rivets (woofer)
- Two 10" Woofer wire extensions
- Installation instructions/ Application guide
- powerbass Facebook page note
- Window sticker
REVIEWS
Customer reviews
Loading reviews...
PowerBass OE69C-TY reviews
Average review:
Customer photos
2008 Tundra w/JBL
Crutchfield customer from Pearland, TX on 7/10/2019
2008 Toyota Tundra
Bought these for my 2008 Tundra w/JBL. Was a good fit but not plug and play, had to use wire extension. Sound was acceptable compared to what I had however one of the tweeters did not work :( Would have kept them if it was not for that. Great Customer Service :) no problems exchanging them for Kenwood KFC-XP184C 7", easy to install with all included accessories, and sounds AMAZING. Thank You Crutchfield great customer service and sales.
Pros: almost direct fit plug and play
Cons: questionable reliability
0 of 0 found this helpful
2016 4runner
Jeff from San Antonio, TX on 6/18/2019
2015 Toyota 4Runner
I ordered these to replace the speakers in the front of my 4runner. Installation was simple, though i had to modify the tabs a bit to fit the factory locations. Bass was much better than the factory speakers. After 18 months, both speakers were inoperable. I removed them to find a failed solder joint. After a repair, they are working again but overall I am fairly disappointed in this product.
Pros: easy install, affordable
Cons: poor build quality
0 of 0 found this helpful
PowerBass OE69C-TY
Matthew from Jacksonville, FL on 5/28/2019
2013 Toyota Tundra
Perfect fit for the front doors of my 2013 Tundra CrewMax. I paired them with the matching OE652-TY 6.5" for the rear. They are all powered by a Sony WX-GS920BH head unit which is 45w RMS and 100w max. They are very clean/clear sounding, with noticably better highs than factory and get plenty loud. The build also appears to be far superior to the factory speakers. I doubt the weak stock head unit would have been able to do these speakers justice. The only thing I can say negative is the lack of low end base but they aren't really designed for that being they are mid base drivers. Mid base sounds good though and the highs are very bright and crisp.
Pros: Clean, clear sound, build quality seems very good
Cons: Not as much bass as I hoped for but the mid bass is certainly there and very clear/crisp.
0 of 0 found this helpful
PowerBass OE69C-TY
dusty from Newport, OR on 1/11/2019
2011 Toyota Camry
didn't get 8 months out of these speakers run off of in dash receiver. just stopped working altogether
Pros:
Cons:
1 of 1 found this helpful
PowerBass OE69C-TY
Ryan from Colorado Springs, CO on 8/30/2018
2011 Toyota Highlander
Horrible build quality, I have had 2 sets and out of the box one out was bad. Now, after 5 months having same issue. Powerbass's customer service is even worse than the build quality!
Pros:
Cons:
2 of 3 found this helpful
More details on the PowerBass OE69C-TY
Features & specs
| General | ||
|---|---|---|
| Speaker Size | Vehicle-specific | |
| Design | 2-way | |
| Tweeter Design | 3/4" Inverted Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Titanium | |
| Woofer Composition | Injection-Molded Polypropylene | |
| Woofer Surround | Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 89 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 65 - 20k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 80 | |
| Peak Power Handling (Watts) | 160 | |
| Top-mount Depth (Inches) | 1 7/8 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 0 | |
Product Research
Features
Wiring: In most installations the OE69C-TY is designed for, the factory wiring harness plugs directly into the woofer frame. In the cases where that's not possible, a 10" wire extension is included.
Fit: The OE69C-TY is designed as a plug and play replacement for select Lexus and Toyota models. Please enter your vehicle information to confirm fit.
Rivets: Rivets are included for mounting the woofers. If you don't own (and don't want to buy) a rivet gun, screws can be used instead. Screws are not included.
Inverted Dome Tweeter: Because the tweeters include no grilles, the OE69C-TY should only be installed in applications where there is a factory tweeter (with a grille).
Loading accessories...
Customer Q&A
Q Crutchfield asked: Why did you buy this?
Loading articles...
