About the PowerBass OE-700
Replacement speakers for your 2-ohm factory system
Replacement speakers for your 2-ohm factory system
Some vehicles use low-impedance speakers to get a little more punch out of the factory radio. If you try to replace these speakers with standard 4-ohm aftermarket speakers, you'll notice a significant loss of volume — never a good thing. These 2-ohm replacement speakers, specially designed by PowerBass, will make the most of your factory power. Install these OE-700 7" midrange speakers, and you'll hear a big improvement in sound quality over your old factory speakers.
Step up to aftermarket quality
Say goodbye to flimsy factory woofers. The OE-700's sturdy yet sensitive polypropylene woofer and butyl rubber surround delivers satisfying performance while enduring the extreme temperatures of life in your car doors.
Note: These speakers won't work with aftermarket car stereos, unless you add a 2-ohm stable outboard amplifier to your system. PowerBass designed these speakers for use with a 2-ohm factory system.
Grilles are not included; the factory grilles should be suitable for most applications.
Product highlights:
- 7" midrange speakers (pair)
- designed for use in 2-ohm factory systems — please call to confirm compatibility with your vehicle
- not compatible with an aftermarket car stereo, unless you add a 2-ohm stable outboard amplifier to your system
- injection molded polypropylene/carbon fiber woofer cone with butyl rubber surround
- handles up to 90 watts RMS (270 watts peak power)
- frequency range: 55-5,500 Hz
- sensitivity: 90 dB
- top-mount depth: 2-7/16"
- impedance: 2 ohms
- grilles not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # OE-700
What's in the box:
PowerBass OE-700 owner's manual
- Two midrange speakers
- Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
- Eight 1" Screws
- 8 Speed clips
- 4 Red plastic wire caps
- Application guide
- Template
- powerbass Facebook page note
- Window sticker
12 reasons to shop with us
#7
60-day price protection
If our price drops after you buy, call us.
REVIEWS
Customer reviews
Loading reviews...
PowerBass OE-700 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the PowerBass OE-700
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 7 | |
| Design | 1-way | |
| Tweeter Design | --- | |
| Impedance (Ohms) | 2 | |
| Tweeter Composition | --- | |
| Woofer Composition | Injection-Molded Polypropylene | |
| Woofer Surround | Butyl Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | 90 | |
| Sensitivity at 2.83 volts | N/A | |
| Frequency Response | 55 - 5.5k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 90 | |
| Peak Power Handling (Watts) | 180 | |
| Top-mount Depth (Inches) | 2 7/16 | |
| Bottom-mount Depth (Inches) | N/A | |
| Cutout Diameter or Length (inches) | 5 15/16 | |
| Mounting Height (Inches) | 0.236 | |
Product Research
Features
Application: On their website, PowerBass notes the 2Ω OE-Series speakers are not designed for use with aftermarket head units or amplifiers. However, if an amplifier is 2Ω stable, with appropriate output power, the speakers are compatible.
The PowerBass OE-700 replaces these items
- designed for use in 2-ohm factory systems — please call to confirm compatibility with your vehicle
- injection molded polypropylene/carbon fiber woofer cone with butyl rubber surround
- handles up to 90 watts RMS (270 watts peak power)
Loading accessories...
Customer Q&A
Loading articles...
