Contact us
Close contact box

Ring Smart Lighting Spotlight 2-pack + Bridge

Two battery-powered LED spotlights and hub that adds smart control (White)

Item # 1695B12Y8W

Expand your home's ring of security with this smart Spotlight and Bridge combo.

Expand your home's ring of security with this smart Spotlight and Bridge combo.

River
Need help?
Contact our Virginia-based experts.
Ask a question

Item # 1695B12Y8W

Ships free today

In stock
$99.00

Other options

River
Need help?
Contact our Virginia-based experts.

About the Ring Smart Lighting Spotlight 2-pack + Bridge

Shine a light where you need it

Ring's Smart Lighting Spotlights are weather-resistant and battery-powered, so they can go almost anywhere. These petite, motion-sensing lights are a great way to brighten up the dark corners of your landscape. But when you connect them to your Ring ecosystem using the included Ring Smart Lighting Bridge, they can do more than shine a light.

Shine a light where you need it

Ring Smart Lighting Spotlight

Ring's Smart Lighting Spotlights are weather-resistant and battery-powered, so they can go almost anywhere. These petite, motion-sensing lights are a great way to brighten up the dark corners of your landscape. But when you connect them to your Ring ecosystem using the included Ring Smart Lighting Bridge, they can do more than shine a light.

When someone enters either motion zone, it will not only light up the area, but it will also send a notification to your phone to let you know. And if you have them grouped with each other or any Ring Smart Lighting, it can turn those on, too.

If you are a Ring Protect subscriber, you can even have that motion trigger recording on your other Ring cameras and doorbells so you can capture footage earlier.

Alexa, turn on the lights

When you connect your Spotlights via the Bridge, you can use select Alexa-enabled devices to control your lights using your voice. And Alexa can speak up when one of your lights or motion sensors detects motion.

READ LESS

Product highlights:

Spotlight (x2):
  • battery-powered, motion-activated LED spotlight
    • 3500°-Kelvin, 400-Lumen bulbs
  • adjustable motion detector
    • up to 120° field of view
    • 30-foot range
  • adjustable auto-shutoff time: 30 seconds to 2 minutes
  • weather-resistant (IP 66 rating)
  • operating temperature: -4°F to 122°F
  • powered by 4 "D" batteries (not included)
    • battery life: approximately 1 year with normal use
  • 3-7/8"W x 6-1/2"H x 4-3/8"D
  • warranty: 1 year
Bridge:
  • hub controls up to 50 Ring Smart Lighting devices
    • group lights
    • turn lights on/off from app
    • get smart alerts on your mobile device when motion is detected
    • voice control using compatible Alexa-enabled devices
    • motion detected by sensors or lights can trigger Ring Doorbells or cameras to begin recording video (Ring Protect plan required)
  • connects to other Ring devices using a proprietary long-range communication protocol
  • connects to the Ring app using your home Wi-Fi network (2.4 GHz)
  • place indoors as close to Smart Lighting as possible, preferably near a window
  • operating temperature 32°F to 120°F
  • 2-3/8"W x 2-1/2"H x 13/16"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # 5B12X9-WEN0

What's in the box:

  • This Ring Smart Lighting Bundle includes two battery-powered Ring Spotlights (in White) and the Ring Bridge -- both packaged separately.
  • Each Spotlight box includes:
  • Ring motion-activated Spotlight (white)
  • Screwdriver (with Phillips and flat bit installed)
  • 3 Self-tapping screws (1" length)
  • 3 Plastic wall anchors
  • Owner's Manual
  • Ring app QR Code
  • Ring window decal
  • Compliance sheet
  • The Ring Bridge box includes:
  • Ring Bridge
  • Mounting bracket
  • 40" USB cable (Type A USB on one end and Micro-B USB on other end)
  • AC adapter with female Type A USB output (DC output: 5V 1A)
  • 2 Self-tapping screws (length 1")
  • 2 Plastic wall anchors
  • Owner's Manual
  • Ring app QR Code
  • Ring window decal
  • Compliance sheet

Customer reviews

We don't have any reviews, yet.
Submit a review and then enter to win a $350 rewards card.
Be the first to review this product

Loading reviews...

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Ring Smart Lighting Spotlight 2-pack + Bridge

Mark G.

Product Research

Features

Overview: Ring's new Smart Lighting products can light specific areas around the exterior of your home for added safety and security. These battery-powered Spotlights can illuminate your garage, back porch, shed, or yard when motion is detected. The Spotlight Battery can turn itself on automatically when it detects motion, in sync with other Ring Smart Lights*, or manually through the Ring App*. The Spotlights are powered by 4 D-cell alkaline batteries (not included), and can easily be installed on most surfaces, including masonry. The lights come with installation tools and hardware, and are protected by a 1-year limited warranty.

* Note: The Ring Bridge (included in this bundle) is required for setup and interacting with other Ring Products or the Ring App.

Ring Bridge: The Ring Bridge integrates Ring Smart Lights, Motion Sensors, and Transformers into your Ring system. The Bridge uses your home Wi-Fi (802.11 b/g/n, 2.4GHz) to connect to the Ring app. It also connects to other Ring Smart Lights using a proprietary long-range protocol. During setup on the Ring app, you can control groups of lights at once, and receive notifications via the app when any light or motion sensor detects movement. You can also integrate Smart Lights with Ring Doorbells or Security Cameras for enhanced security, and control the lights via voice control with Alexa. A minimum internet upload speed of 1 Mbps is required, but for optimal performance, 2 Mbps or higher is recommended. Up to 50 Ring Smart Lighting devices can be supported by a single Bridge. Without the Bridge, Ring Smart Lights function only as standard motion-sensing lights.

Spotlight: The Ring Spotlight Battery has an adjustable, high-efficiency LED light that illuminates the important areas around your home with 400 lumens of brightness, at a 3500K Color Temperature. The light has an adjustable auto shutoff time of 30 seconds to 2 minutes.

Motion Detection: The Ring Spotlight features adjustable motion detection with a field of view of up to 120°. It has a range of up to 30 feet, with the detection angle dependent upon the distance from the unit. The motion detector unit tilts up and down or rotated with the light, allowing you to aim the detector in any direction or angle.

Installation: The Spotlight is designed to be mounted on an exterior wall of your home with two screws (provided). If mounted to a masonry surface, the included wall anchors should be used. No hardwiring is required. The motion detection works best when the Spotlight is mounted 8-12 feet above the ground. Average install time is approximately 15 to 30 minutes.

Battery Powered: The Spotlight Battery is powered by 4 D-cell alkaline batteries (not included). Under normal use, fresh batteries will last approximately 1 year, based on 8 to 10 light activations per day at Level 8 brightness, 20 seconds duration. Battery life is dependent on the device settings, usage, and other factors. As the battery power is depleted, the brightness may decrease.

Weather Resistant: The Spotlight is designed to be used outdoors. With its IP66 rating, it is resistant to inclement weather and temperature extremes (-4°F to 122°F).

Ring App: The Ring Bridge lets you control your Smart Lighting devices via the Ring App on your smartphone or tablet. The Ring App lets you turn individual lights on or off, or group lights together and control them as a group (front yard, back yard, etc.). The app also provides instant notification when motion is detected by one or more of your Smart Lights, as well as view a list of recent activity at your home. You can control the brightness, adjust the motion detection sensitivity, and monitor the battery level in each light from the app.

Ask Alexa: Using the Bridge, you can link your Ring Smart Lights to your Alexa-enabled devices to give you control over your lights with your voice. You can turn individual or groups of lights on or off, and adjust settings (brightness, motion detection sensitivity) with your Alexa device. When enabled, Alexa will notify you when motion is detected by any of your Smart Lights.

Security or Convenience: The Ring Bridge can provide enhanced security for your home when added to your Ring security system. With the motion detection abilities of the Smart Lighting devices, the Bridge can link together the lights with your Ring doorbell cameras and security cameras to create a wider reach. You can also program all of your Smart Lights to turn on whenever one detects motion. For convenience, you can link together your Smart Lighting devices to light your path when you come home after dark. When one of the devices detects motion, you can set the system (through the Ring app) to turn on your Pathlights, Steplights, Floodlights, or Spotlights to safely light your way to the door.

Loading accessories...

Customer Q&A

Loading articles...

TOP