About the Ring Smart Lighting Steplight Battery
Light up steps and walkways
Light up steps and walkways
Just the other day, I misjudged where my concrete front step was, and I smashed into it with my sandal-clad toe. I think I might need some of these Steplights from Ring. They are battery-powered and weather-resistant, so you can tuck one anywhere you need a little illumination. Each light has a built-in motion sensor, so as you approach your walkway, steps, or porch, it lights your way — and might just save your toes.
And if you connect it to your Ring ecosystem using the Ring Smart Lighting Bridge (sold separately), it can do more than shine a light. When someone enters the motion zone, it will not only light up the area, but it will also send a notification to your phone to let you know. And if you have it grouped with other lights, it can turn those on, too.
Alexa, turn on the lights
When you connect your Steplight via the Bridge, you can use select Alexa-enabled devices to control your lights using your voice. And Alexa can speak up when one of your lights or motion sensors detects motion.
- battery-powered, motion-activated small LED light for walkways, steps, and decks
- 3500°-Kelvin, 35-Lumen bulb
- brightness is adjustable
- adjustable motion detector
- up to 140° field of view
- 15-foot range
- connect to Ring Smart Lighting Bridge to access "smart" features:
- group lights
- turn lights on/off, adjust brightness from app
- get smart alerts on your mobile device when motion is detected
- voice control using compatible Alexa-enabled devices
- adjustable auto-shutoff time: 30 seconds to 2 minutes
- weather-resistant (IP 66 rating)
- operating temperature: -4°F to 122°F
- powered by 3 "C" batteries (not included)
- battery life: approximately 1 year with normal use
- two keyhole slots on back for easy installation
- 3-5/8"W x 3-5/8"H x 1-7/8"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 5LD1S8-BEN0
What's in the box:
- Motion-activated Steplight (black)
- Screwdriver handle
- Screwdriver bit (Phillips head and flat head)
- 2 Self-tapping screws (7/8" length)
- 2 Plastic wall anchors
- Owner's Manual
- Ring app QR Code
- Ring window decal
- Compliance sheet
Thanks for submitting your review
More details on the Ring Smart Lighting Steplight Battery
Overview: Ring's new Smart Lighting products can light specific areas around the exterior of your home for added safety and security. This battery-powered Steplight can illuminate your outdoor stairs, decks, or walkways when motion is detected. The Steplight can turn itself on automatically when it detects motion, in sync with other Ring Smart Lights*, or manually through the Ring App*. The Steplight is powered by 3 C-cell alkaline batteries (not included), and can easily be installed on most surfaces, including masonry. The light comes with installation tools and hardware, and is protected by a 1-year limited warranty.
* Note: The Ring Bridge (sold separately) is required for setup and interacting with other Ring Products or the Ring App.
Ring Bridge: The Ring Bridge integrates Ring Smart Lights, Motion Sensors, and Transformers into your Ring system. The Bridge uses your home Wi-Fi to connect to the Ring app. It also connects to other Ring Smart Lights using a proprietary long-range protocol. During setup on the Ring app, you can control groups of lights at once, and receive notifications via the app when any light or motion sensor detects movement. You can also integrate Smart Lights with Ring Doorbells or Security Cameras for enhanced security. Without the Bridge, Ring Smart Lights function only as standard motion-sensing lights.
Steplight: The Ring Steplight has an adjustable, high-efficiency LED light that illuminates the important areas around your home with 35 lumens of brightness, at a 3500K Color Temperature. The light has an adjustable auto shutoff time of 30 seconds to 2 minutes. In the Ring app, you can adjust the light intensity, and select a Dusk-to-Dawn glow, if desired.
Motion Detection: The Ring Steplight features adjustable motion detection with a field of view of up to 120°. It has a range of up to 15 feet, with the detection angle dependent upon the distance from the unit.
Installation: The Steplight is designed to be mounted on an exterior wall of your home with two screws (provided). If mounted to a masonry surface, the included wall anchors should be used. No hardwiring is required. Average install time is approximately 5 to 10 minutes.
Battery Powered: The Ring Steplight is powered by 3 C-cell alkaline batteries (not included). Under normal use, fresh batteries will last approximately 1 year, based on 8 to 10 light activations per day at Level 8 brightness, 20 seconds duration. Battery life is dependent on the device settings, usage, and other factors. As the battery power is depleted, the brightness may decrease.
Weather Resistant: The Steplight is designed to be used outdoors. With its IP66 rating, it is resistant to inclement weather and temperature extremes (-4°F to 122°F).
2 questions already asked