About the Ring Smart Lighting Motion Sensor
Expand your range
Expand your range
Adding Ring smart lighting to your landscape? You can install motion sensors in areas where you don't necessarily need a light or a camera to extend the range of your other Ring devices. You'll get real-time security alerts on your mobile device whenever motion is detected. You can also have that motion trigger some or all of your Ring lighting.
Additional features with Ring Protect
A Ring Smart Lighting Bridge (sold separately) is required for use.
- motion detector for Ring Smart Lighting system
- adds an extra 15 feet of motion detection to connected devices
- sends you a mobile alert when motion is detected
- detected motion can trigger Ring Doorbells or cameras to begin recording video (Ring Protect plan required)
- requires Ring Bridge to activate connected Ring devices
- weather-resistant for outdoor placement (IP66 rating)
- operating temperature range: -4°F to 122°F
- powered by 3 "AAA" batteries (not Included)
- 2-7/8"W x 2-7/16"H x 2-3/8"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 5SM1S8-WEN0
What's in the box:
- Ring Motion Sensor on swivel base (white)
- Screwdriver handle
- Dual screwdriver bit (Phillips head and flat head)
- 2 Self-tapping screws (length 1")
- 2 Plastic wall anchors
- Owner's Manual
- Ring app QR Code
- Ring window decal
- Compliance sheet
Thanks for submitting your review
More details on the Ring Smart Lighting Motion Sensor
Overview: Ring's new Smart Lighting products can light specific areas around the exterior of your home for added safety and security. This battery-powered Motion Detector links to the Ring Bridge (sold separately) to activate connected Ring Smart Lights, as well as Ring doorbells and cameras, whenever motion is detected. The Motion Detector is powered by 3 AAA-cell alkaline batteries (not included), and can easily be installed on most surfaces, including masonry. The detector comes with installation tools and hardware, and is protected by a 1-year limited warranty.
Ring Bridge: The Ring Bridge integrates Ring Smart Lights, Motion Sensors, and Transformers into your Ring system. The Bridge uses your home Wi-Fi to connect to the Ring app. It also connects to other Ring Smart Lights using a proprietary long-range protocol. During setup on the Ring app, you can control groups of lights at once, and receive notifications via the app when any light or motion sensor detects movement. You can also integrate Smart Lights with Ring Doorbells or Security Cameras for enhanced security. Without the Bridge, Ring Smart Lights function only as standard motion-sensing lights.
Motion Detection: The Ring Motion Detector features adjustable motion detection with a field of view of up to 120°. Sensitivity is adjustable in the Ring app. It has a range of up to 15 feet, with the detection angle dependent upon the distance from the unit.
Installation: The Motion Detector is designed to be mounted on an exterior wall of your home with two screws (provided). If mounted to a masonry surface, the included wall anchors should be used. No hardwiring is required. Average install time is approximately 5 to 10 minutes.
Battery Powered: The Ring Motion Detector is powered by 3 AAA-cell alkaline batteries (not included). Under normal use, fresh batteries will last approximately 1 year. Battery life is dependent on the device settings, usage, and other factors. As the battery power is depleted, the motion detection range may decrease.
Weather Resistant: The Motion Detector is designed to be used outdoors. With its IP66 rating, it is resistant to inclement weather and temperature extremes (-4°F to 122°F).