About the Ring Smart Lighting Floodlight Wired + Bridge
A smart pair
Ring's Smart Lighting Floodlight is a powerful motion-sensing floodlight, but when you connect it to your Ring ecosystem using the included Ring Smart Lighting Bridge, it can do more than shine a light.
When someone enters the motion zone, it will not only turn on the ultra-bright LED floodlights, but it will also send a notification to your phone to let you know. And if you have it grouped with other lights, it can turn those on, too.
If you are a Ring Protect subscriber, you can even have it trigger recording on your other Ring cameras and doorbells so you catch motion events even earlier.
Alexa, turn on the lights
When you connect your Floodlight via the Bridge, you can use select Alexa-enabled devices to control your lights using your voice. And Alexa can speak up when one of your lights or motion sensors detects motion.
- hardwired, motion-activated LED floodlight
- 3500°-Kelvin, 2000-Lumen bulbs
- 4-way positionable motion detector
- up to 180° field of view
- 70-foot range
- adjustable auto-shutoff time: 30 seconds to 2 minutes
- mounting requirement: 4-inch round weatherproof electrical box with 110-240 volts AC power
- operating temperature: -4°F to 118.4°F
- 7"W x 8-3/8"H x 7-1/4"D
- warranty: 1 year
- hub controls up to 50 Ring Smart Lighting devices
- group lights
- turn lights on/off from app
- get smart alerts on your mobile device when motion is detected
- voice control using compatible Alexa-enabled devices
- motion detected by sensors or lights can trigger Ring Doorbells or cameras to begin recording video (Ring Protect plan required)
- connects to other Ring devices using a proprietary long-range communication protocol
- connects to the Ring app using your home Wi-Fi network (2.4 GHz)
- place indoors as close to Smart Lighting as possible, preferably near a window
- operating temperature 32°F to 120°F
- 2-3/8"W x 2-1/2"H x 13/16"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 5W21X8-WEN0
What's in the box:
- Ring wired floodlight (white)
- Ring Bridge
- Base cover (white)
- Rubber gasket
- Hardware Pack A (Three M4.5 x 12mm screws)
- Hardware Pack B (Three M4.5 x 18mm)
- Hardware Pack C (Three M4.5 x 16mm)
- Hardware Pack D (Three M4 x 12mm)
- Hardware Pack E (Three M4 x 15mm)
- Hardware Pack F (Two M5 x 20mm)
- Hardware Pack G (3 Twist-on wire nuts 14-16 ga)
- Hardware Pack H (Three M4 x 9mm)
- Screwdriver handle
- Phillips/Flat head screwdriver bit
- Metal mounting bracket
- Bridge mounting bracket
- 2 Self-tapping mounting screws (1" length)
- 2 Plastic wall anchors
- AC adapter (DC output: 5V 1A)
- 39" USB cable (Type A USB on one end and Micro-B USB on other end)
- Owner's Manual
- Ring app QR Code
- Ring window decal
- Compliance sheet
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Ring Smart Lighting Floodlight Wired + Bridge reviews
Thanks for submitting your review
More details on the Ring Smart Lighting Floodlight Wired + Bridge
Overview: Ring's new Smart Lighting products can light specific areas around the exterior of your home for added safety and security. This Floodlight Wired Starter kit gives you what you need to put together a connected lighting system that you can expand to other areas of your home. The hardwired Floodlight can illuminate your driveway, yard, and high-traffic areas when motion is detected. The Floodlight can turn itself on automatically when it detects motion, in sync with other Ring Smart Lights, or manually through the Ring App. The Floodlight is hardwired into your home's electrical circuit (100-240V), and can easily replace an existing floodlight, or installed in a new location. The light comes with installation tools and hardware, and is protected by a 1-year limited warranty.
Note: The included Ring Bridge is required for setup and interacting with other Ring Products or the Ring App.
Floodlight: The Ring Floodlight has two independently adjustable, high-efficiency LED lights that illuminate the important areas of your home with 2000 lumens of brightness, at a 3500K Color Temperature. The light has an adjustable auto shutoff time of 30 seconds to 2 minutes.
Motion Detection: The Ring Floodlight features adjustable motion detection with a field of view of up to 180°. It has a range of up to 70 feet, with the detection angle dependent upon the distance from the unit. The motion detector unit is mounted to the Floodlight fixture with a 4-way adjustable ball-and-socket joint which allows you to aim the detector in any direction or angle.
Installation: The Floodlight is designed to be mounted on an exterior wall of your home, replacing an existing floodlight. It requires a 4" diameter round weatherproof junction box with AC power wiring. The included mounting bracket installs over the junction box, and has multiple length threaded mounting posts for securing the Floodlight. Average install time is approximately 15 to 30 minutes.
Included Hardware: The Floodlight includes the Bag o' Screws, which consists of seven small packets of screws and a bag of wire nuts for wiring and installing the light. Each packet is marked with a letter to designate the type of screws included: standard screws (bag A), longer standard screws for recessed junction boxes (bags B & C), screws for older boxes with smaller screw holes (bags D & E), screws for securing the plastic mounting plate (bag F), wire nuts (bag G), and screws for mounting the Floodlight to the plate (bag H). Ring has thoughtfully included an extra screw in each bag, just in case you drop one during the installation.
Weather Resistant: The Floodlight is designed to be used outdoors. It is resistant to inclement weather and temperature extremes (-4°F to 118.4°F).
Ring Bridge: The Ring Bridge integrates Ring Smart Lights, Motion Sensors, and Transformers into your Ring system. The Bridge uses your home Wi-Fi to connect to the Ring app. It also connects to other Ring Smart Lights using a proprietary long-range protocol. During setup on the Ring app, you can control groups of lights at once, and receive notifications via the app when any light or motion sensor detects movement. You can also integrate Smart Lights with Ring Doorbells or Security Cameras for enhanced security, and control the lights via voice control with Alexa. Without the Bridge, Ring Smart Lights function only as standard motion-sensing lights.
Compatible Products: The Ring Bridge is compatible with the following Ring Smart Lighting Products: Floodlight Battery, Floodlight Wired, Spotlight Battery, Pathlight, Steplight, and Motion Sensor. Up to 50 Ring Smart Lighting devices can be supported by a single Bridge. With the Ring Bridge, these Smart Lighting products can be connected to Ring doorbells and cameras so you can view or record what's happening when motion is detected.
Wi-Fi: The Bridge wirelessly connects to your Smart Lighting devices via Wi-Fi (802.11 b/g/n, 2.4GHz). A minimum internet upload speed of 1 Mbps is required, but for optimal performance, 2 Mbps or higher is recommended.
Mounting: The Ring Bridge is powered by the supplied power supply, which includes an AC adapter with a USB output and a Micro USB cable. For best connection to the outdoor-installed Smart Lighting devices, installation near a front window is recommended. It is designed for indoor installation only. The Bridge has a mounting bracket which attaches to the wall with two screws (supplied). The Bridge then slides into the bracket and locks into place. The average install time is approximately 5 minutes.
Ring App: The Ring Bridge lets you control your Smart Lighting devices via the Ring App on your smartphone or tablet. The Ring App lets you turn individual lights on or off, or group lights together and control them as a group (front yard, back yard, etc.). The app also provides instant notification when motion is detected by one or more of your Smart Lights, as well as view a list of recent activity at your home. You can control the brightness, adjust the motion detection sensitivity, and monitor the battery level in each light from the app. The Ring app is compatible with iPhones and iPads with iOS 9.3 or later, as well as Android devices running version 5.0 and up. For laptops and desktop computers, the Ring app works with Windows 10 and macOS.
Ask Alexa: Using the Bridge, you can link your Ring Smart Lights to your Alexa-enabled devices to give you control over your lights with your voice. You can turn individual or groups of lights on or off, and adjust settings (brightness, motion detection sensitivity) with your Alexa device. When enabled, Alexa will notify you when motion is detected by any of your Smart Lights.
Security or Convenience: The Ring Bridge can provide enhanced security for your home when added to your Ring security system. With the motion detection abilities of the Smart Lighting devices, the Bridge can link together the lights with your Ring doorbell cameras and security cameras to create a wider reach. You can also program all of your Smart Lights to turn on whenever one detects motion. For convenience, you can link together your Smart Lighting devices to light your path when you come home after dark. When one of the devices detects motion, you can set the system (through the Ring app) to turn on your Pathlights, Steplights, Floodlights, or Spotlights to safely light your way to the door.
1 question already asked