Ring Solar Charger
Solar power source and mounting bracket for Ring Video Doorbell 2
Our take on the Ring Solar Charger by Crutchfield's Emily S.
I just got a notification from Ring saying that my doorbell's battery is low. While it's not excessively troublesome to remove and charge the battery, it's still a hassle I wouldn't mind avoiding. Well — with this solar charger and a few hours of direct sunlight per day, I could.
It comes with everything you need to securely mount it to your wall and connect it to your doorbell. Then the built-in solar panels will do the charging, so you don't have to. Just remember, this one is made specifically for Ring Video Doorbell 2. If you have Ring Video Doorbell, you'll need this one.
- solar panel keeps Ring Video Doorbell 2 charged
- requires a few hours of direct sunlight per day
- solar power rating: 0.56W, 5.6VDC
- only works with Ring Video Doorbell 2
- 3-5/8"W x 5-13/16"H x 3/4"D
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- Solar charger and mount for Ring Doorbell 2
- Screwdriver with star and Phillips bit
- 6mm / 15/64" Drill bit
- 3 M3 x 6mm screws
- 5 M3 x 10mm screws
- 5 M3 x 30mm screws
- 5 Plastic wall anchors
- Installation Manual
Why Shop With Us?10 Reasons.
Overview: This Solar Charger is designed for the Ring Video Doorbell 2. Its built-in solar panels keep your Video Doorbell 2 charged. The weather-resistant Solar Charger also doubles as a secure mounting bracket. The Solar Charger comes with the hardware for mounting it to most hard surfaces, including brick and stucco.
Note: This Solar Charger is not compatible with the original Ring Video Doorbell.
Solar Powered Charging: The Ring Solar Charger features three built-in solar panels - two 4-3/4" panels along the sides and a 2-3/8" panel across the top. These solar panels have a power rating of 0.35 watts and 6.9 volts DC. The panels require a few hours of direct sunlight every day to ensure the Video Doorbell 2 is adequately charged.
Installation: The Ring Solar Charger installs to most flat surfaces. Self-tapping screws are included for mounting the charger to an external wall. Wall anchors (included) are required if you are mounting the charger to a hard surface, such as brick or stucco. Machine screws for attaching the Ring Doorbell 2 to the charger are also included. Prior to installing the Video Doorbell 2, you will need to connect the wires from the charger to the screw terminals on the back of the doorbell.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.