worked
Crutchfield customer from Tilton, NH on 7/12/2020
works nice but it is metal i was disappointed at first i expected it to be plastic but it didn't chip or scratch
Pros: worked just fine
Cons: its metal
0 of 0 found this helpful
Worked perfectly with do damage
Crutchfield customer from Berthoud, CO on 2/10/2020
Worked perfectly with do damage. Strong enough for the job.
Pros: Worked perfectly with do damage
Cons: None
0 of 0 found this helpful
Helpful tool.
Crutchfield customer from Murray, KY on 12/10/2019
Great tool for door panels etc. Makes install of speakers much easier.
Pros:
Cons:
0 of 0 found this helpful
S&G Tool Aid 87650
Crutchfield customer from Moosic, PA on 6/1/2019
1 of 1 found this helpful
Not recommended
Crutchfield customer from Manning, SC on 4/10/2019
A 3" wide putty knife worked better, because the tool has a blunt front edge that will not slide under the panel. A design compromise that makes the tool non-functional.
Pros:
Cons: Design flaw.
0 of 1 found this helpful
S&G Tool Aid 87650
Crutchfield customer from Seaford, DE on 3/21/2019
Works great, popped the door panel with ease
Pros:
Cons:
0 of 0 found this helpful
Useful tool
Merit from Phillips, ME on 8/31/2017
Made removal very easy, and will be used in the future on other trim items.
Pros: Quality tool.
Cons: None
0 of 0 found this helpful
S&G Tool Aid 87650
Thomas from Brentwood, TN on 8/9/2017
0 of 0 found this helpful
Didn't need it
Carolyn from Circleville, OH on 3/15/2017
To be honest, I never even had to open this.
Pros:
Cons:
0 of 2 found this helpful
S&G Tool Aid 87650
Crutchfield customer from Freeport, TX on 2/3/2017
I thought it was just for the door handles.
Pros:
Cons:
0 of 0 found this helpful
S&G Tool Aid 87650
Howard from Mesa, AZ on 1/31/2017
This product was perfect for completing my speaker installation. I was able to easily pop the connectors out without damaging them. This is a must have item in every toolbox.
Pros: Allows damage free disassembly of door panels.
Cons: None
1 of 1 found this helpful
Very Helpful
W. Todd from Ontario, CA on 7/15/2016
This tool came in very handy. It pries the door molding very nicely. The reason only four stars is it will scrape the paint so you might need to use a handkerchief or rag.
Pros:
Cons:
1 of 1 found this helpful
NEEDED
Corbin from Victoria, TX on 4/6/2016
NEEDED if one is going to remove their factory receiver. Takes some work but if you do it right itll be easy.
Pros: Gets the receiver out.
Cons: Hard to make sure if youre doing it right. But be forceful with it.
0 of 0 found this helpful
Helpful tool
Brad from Greenville, SC on 3/30/2016
This tool made it a lot easier to do the install without damaging my car
Pros: Worked great
Cons: none
0 of 0 found this helpful
Great tool
Irfan from alexandria, VA on 3/6/2016
0 of 0 found this helpful
S&G Tool Aid 87650
Crutchfield customer from st amant, LA on 1/26/2016
Good tool to use when separating door panels!
Pros:
Cons:
1 of 1 found this helpful
Door panel-removal tool
mikewh328 from New Jersey on 10/28/2015
This is an excellent-made tool, and definitely a requirement for those that have had no experience with removing molded-door panels before.
Pros: Excellent tool to have.
Cons: Ask your friends first to see if they already have one before you get one - unless you're in the business of popping out door panels on a regular basis, you'll only be using this tool one time. I only found out a friend of mine had the same tool AFTER I already received mine and used it.
2 of 2 found this helpful
Great tool
Nate from Alabama on 7/14/2015
Great tool! I used it on all 4 doors of my 01 suburban.
Pros:
Cons:
0 of 0 found this helpful
Panel removal tool
John from North GA on 6/20/2015
Was very helpful in removing interior panels. Between it and my hands, it went smoothly.
Pros: Easy and helpful
Cons: Could be longer, leaves marks on work area (wrapped mine in masking tape to not scratch anything)
2 of 2 found this helpful
Works better than a flathead screwdriver
JCool from Connecticut on 5/28/2015
This works a lot better than a flathead screwdriver, it's much wider and angled. Less likely to do panel damage. My advice for door panels, don't push too far into the panel, start slowly and peek in to find the pegs. I was too eager at first and got panel glue all over the tool.
Pros: Works better than a flathead screwdriver on door panels
Cons: Not sure it's worth price tag but I'm glad I have it now
2 of 2 found this helpful
S&G Tool Aid 87650
Wayne G from Lebanon, TN on 4/27/2015
I think they always recommend this. It can be handy, and I probably could have gotten the job done without it, but that's OK. Not terribly built for what you pay for it.
Pros: Well constructed
Cons:
0 of 0 found this helpful
Does the job with exceptions
JJ from Columbus, OH on 2/9/2015
I ordered this tool because I've used screwdrivers in the past to pry apart panels. The screwdriver works great with a little duct or electrical tape on it to prevent scratching. The problem with a screw driver is it is a small point of entry and thus a small point of force. It greatly increases the possibility of cracking or breaking one of your door clamps upon exertion. This tool in theory and most of the design is great. The problem with the tool is that the front lip is not angled but rather it's flat. This in turn can cause you to knick up visible portions of your trim pieces. Being that it's already so thick, it makes it quite impossible to cover the end with tape as you would a screwdriver. You end up using the screw driver to start the process and finish by prying with the removal tool. Not too efficient.
Pros: Sturdy, greater area to apply force
Cons: Too thick at head, metal can scratch paint
4 of 4 found this helpful
Tool works Magily
AndrewG from Georgia on 1/22/2015
Pop the door panels off with no problem.
Pros: Easy to use. Does exactly what its used for very very well.
Cons: n/a
0 of 0 found this helpful
Easy to use
r from Worcester, MA on 1/7/2015
Great tool, cheap and does the job
Pros: ease of use, cost
Cons: none
0 of 0 found this helpful
Not Needed
Dave from Helena, MT on 12/5/2014
You don't need this, so it's a waste of money. Just use tools you have at home. I actually didn't need any tools. I just watched a video online and then popped the the dash, etc with my fingers. If anything, get a flat plastic paint scraper or something similar from the local hardware store.
Pros:
Cons:
4 of 4 found this helpful
Worthless
FredB from Lakeland FL on 11/30/2014
Pretty much a worthless tool at least for my truck. It was recommended by Crutchfield but I didnt have the clips that this tool was made for.
Pros: none
Cons: Not needed
1 of 1 found this helpful
Dude
Cali dude from California on 11/15/2014
Easy removal of door panels, followed instructions they provide and you'll have no problems!
Pros: Everything,way easy to remove the panel! Take your time don't rush
Cons: None
1 of 1 found this helpful
S&G Tool Aid 87650
Crutchfield customer from gaithersburg maryland on 10/27/2014
0 of 0 found this helpful
gotta have one
Nathan from Cedar Creek TX 78612 on 10/2/2014
Makes pulling trim and panels easy. Doesn't damage plastic parts. It's way better than a screwdriver.
Pros: Good tool
Cons: None
1 of 1 found this helpful
Works
Jeff from Elizabethtown, KY on 9/2/2014
Tool works and helps prevent breaking the clips holding panels. Could be done without tool, but handy to use. A little pricey so not sure cost vs benefit is good, but does work.
Pros:
Cons:
1 of 1 found this helpful
GREAT LITTLE TOOL
MIKE A from Salt Lake City, UTAH on 5/23/2014
This is a great little tool. This tool was so handy to use, the door panels popped right off with no problems, and saved me time and aggravation. I would highly recommend this tool to everyone.
Pros: Easy to use, worth every penny!!!.
Cons: NONE!.
1 of 1 found this helpful
Very Handy
Jeff from Chesterfield, VA on 4/19/2014
Very handy tool - made the door and trim panel removal simple and easy!!
Pros: easy panel removal
Cons: none
0 of 0 found this helpful
Door Panel Removal Tool
Bob C from MD on 1/10/2014
Tool worked as advertised. Removed panels cleanly without damage.
Pros: Right size and shape for the job.
Cons: The picture in the instructions didn't show enough detail about where to place the tool on the edge of the panel. On my first try I tried to insert it between the weather striping and the panel, not knowing that the weather stripping was part of the panel. After I figured out to pry between the weather stripping and the door, the tool worked beautifully.
2 of 2 found this helpful
Practical
pmack from Fort Worth, TX on 12/17/2013
Worked great! Very easy and practical.
Pros: Great product-easy to use.
Cons: Not plastic coated, I guess.
0 of 0 found this helpful
made it easy
Crutchfield customer from gilbert az on 12/3/2013
0 of 0 found this helpful
Tool Aid
JamesD from Brevard,NC on 10/4/2013
Great tool helped in not damaging the door panels.
Pros: Easy to use and prevents damage to door panels.
Cons: none
0 of 0 found this helpful
Not worth it
nurbeh from north carolina on 8/29/2013
I did with my fingernails what this tool was designed to do. I should have saved the $.
Pros:
Cons:
0 of 1 found this helpful
S&G Tool Aid 87650
Auldbkr from Mansfield ct on 7/14/2013
I was skeptical at first and thought it was a waste of money. However, since I have had some problems with door panels before I bought it. It worked like a charm. Duct taped the handle to make it smoother. Wrapped cloth around the fork to prevent scratches in the paint.
Pros: Simplifies door panel removal considerably.
Cons: None.
1 of 1 found this helpful
S&G door panel tool
JG from Lucasville, Ohio on 7/8/2013
Tool worked as it should & as described
Pros: Easy to use
Cons: Maybe it would be better if handle was dipped in plastic coating.
0 of 0 found this helpful
Not necessary and can scratch paint
stock audio from my car on 6/16/2013
I purchased this tool due to the recommendation of my online advisor. I definitely feel like I just got up sold. They recommended this as a needed item for my subaru. The thing is this is specifically for GM parts. Maybe for specific applications, this is a lifesaver, but it was not needed for mine and it would be overpriced even if it was. This is simply a flat metal pry tool with a notch to fit the clips. It is made of cheap sheet metal and couldn't have cost more the $0.50 to make. It needs a hard coating such as plasti-coat to prevent scratching your vinyl and paint. I wrapped it in masking tape for the same effect. I could've done my job by simply wrapping a stiff putty knife in tape. In the end, I thought my whole purchase from crutchfield was still a good deal, but this was a disappointment and I feel like they represented it as necesary when it was not. It might be needed for your GM, but was definitely not for me. And, even if necesary, the quality of the tool leaves much to be desired.
Pros: Maybe it is need if you have a GM
Cons: Cheaply made, not needed for my subaru, will scratch your paint.
1 of 1 found this helpful
S&G Tool Aid 87650 Easy to use
Mike D from Yonkers NY on 6/10/2013
the tool is very easy to use. seems to be universal for multiple model cars. just slide it between the panel and the clip and pop it
Pros: light, easy to store
Cons: none
0 of 0 found this helpful
Nice Tool!
cdunk4 from Lititz,PA on 6/5/2013
this tool made it quite simple to remove the door panels
Pros: saves fingertips
Cons: none
0 of 1 found this helpful
Good to have
J.J from Birmingham, AL on 5/20/2013
Must have this tool for install
Pros: Good tool
Cons: None
0 of 1 found this helpful
works great
Len from sneads ferry,nc on 5/19/2013
works great
Pros: works great
Cons: it may scratch paint ,so take precautions
0 of 1 found this helpful
S&G Tool Aid 87650
Crutchfield customer from nc on 5/10/2013
0 of 1 found this helpful
Not really needed
KDP250 from Cheyenne, WY on 5/7/2013
Got the door trim removal tool and didn't really need it on any door panel as the door panels on my F250 popped off with no issues and snapped right back into place after replacing the speakers.
Pros:
Cons:
0 of 0 found this helpful
S&G Tool Aid 87650
Crutchfield customer from Frederick, Maryland on 5/7/2013
This was my first install and this tool made all the difference in the world. Used as the directions said and removal was simple.
Pros:
Cons:
0 of 0 found this helpful
S&G Tool Aid
James M from Brunswick, GA on 4/26/2013
This tool made the job so much easier. I was very impressed with the ease of use.
Pros: Fast install
Cons: None to mention.
0 of 0 found this helpful
Great, Simple Tool
Crutchfield customer from Lenexa, KS on 4/22/2013
This little tool is amazing. It made removing my Silverado door panel 10x easier. It's thin enough to get behind, yet strong enough to get the panel fasteners to let go. Extremely handy tool for working on vehicles.
Pros:
Cons:
0 of 0 found this helpful
S&G Tool Aid 87650
DaleF from Belleville Ar. on 4/2/2013
This tool is a life saver. No worries of breaking something, like I usually do with a screwdriver. Would love to have a whole set.
Pros: Easy and safe to use.
Cons: None.
0 of 0 found this helpful
Love this tool!
Jeff G from San Tan Valley, AZ on 3/11/2013
I wish I had this tool years ago! I am always a nervous wreck when pulling panels because its so easy to break the clips. This tool made it so easy. I do try to do my own maintenance so I pull panels sometimes and the worst part is the worrying over breaking the clips. Cant say enough, Get this tool! Truck: 2001 Chevy 2500 HD Ext Cab Components: Sony MEX-BT4100P Polk Audio DXi460p 4"x6" Plate Speakers Polk Audio DXi650s 6.5" Slim Mount Coaxial Speakers MTX T-Form 99-06 GM Extra Cab Tan w/two 10" Subs and 200W Amp Alpine KTP-445U Head Unit Power Pack 45W x 4 Car Amp Kits, Wires, Tools: Chevy/GMC Pickup/Astro Kit 1995-up, S/E S&G Tool Aid 87650 Door Trim and Panel Removal Tool GM Wire Harness receiver, 1985-up GM Antenna Adapter Motorola M to OEM antenna F Posi-Products Connector Kit 16 pieces for Car Stereos AudioQuest G-Snake 2M Audio Interconnect Cables (pair)
Pros: Get this tool! Its cheap and simple.
Cons: None
0 of 0 found this helpful
It helps out a lot!
ABruce18 from Mechanicsburg. PA on 2/15/2013
This tool made my job so much easier with installing speakers and running amp wiring. You could probably do the same without this but this helped a lot and left no scratches if you watch what you are doing.
Pros: Faster Installs
Cons: A littly pricey
0 of 0 found this helpful
Not happy
Richard from El Dorado Ks on 2/3/2013
Although this tool is designed to be helpful after installing my speakers I wish that I had not used or paid for this tool. I have installed hundreds of speakers over the years and in order to do so I have removed may door panels but I have never damaged as much of a door panel as I did this time using this tool! It just seems to apply pressure in such a way that it leads to damage to the panel and the plastic clips used to secure the panel to the door. In the future it would be nice if Crutchfield would supply replacement clips or at least offer them for purchase.
Pros:
Cons:
0 of 1 found this helpful
Great tool for ease without causing scratches
kYboyinCO from Aurora, CO on 1/13/2013
Could have done the work without it but this tool made installation easy and didn't scratch the trim.
Pros:
Cons:
0 of 0 found this helpful
S&G Tool Aid 87650
RM from Kahului, HI on 12/16/2012
A much needed tool to install speakers in the door.
Pros: Perfect tool.
Cons: None.
0 of 0 found this helpful
not needed
Jeff from Sherwood, AR on 9/29/2012
Looks like it would be useful, if your vehicle uses clips to secure the door panels. My 2003 Dodge Ram did not. It has hooks that slide into the door, so once the screws are removed you just lift it off.
Pros: looks like it would work
Cons: didn't need it, pretty expensive for what it is.
0 of 2 found this helpful
S&G Tool Aid 87650
PaPa AL from Woodbury, TN on 8/2/2012
Good quality, works great.
Pros: Hefty & durable.
Cons: None.
0 of 0 found this helpful
Great Basic Tool
Jake W from Corning, NY on 7/6/2012
This tool is much bigger than what the picture shows or maybe it was just me. It's pretty thick so you need to start at a section that is easy to pry up. I did not take this advice but if your worried about your doors wrapping the ends in electric tape could help. My doors came off easy with this tool and only broke one small plastic thing some where out of 4 doors, so overall it was a huge success.
Pros: Saved me time, and energy. Helped me safely remove my doors. Strong and can be used on all different typed of doors.
Cons: Like others have said this is a bit pricey for what it is. I think 5 would be a good value for this but then again 10 is a lot cheaper than having to buy new door panels which I am sure I would have destroyed without this tool.
0 of 0 found this helpful
Great Tool
Chris from Durham,VA on 3/15/2012
Great tool. Completely worth the money. Worked great on both cars installing the head units.
Pros: Cheap and saves you money by not scarring up panels in car.
Cons:
1 of 1 found this helpful
Perfect popper
Dave from Kentucky on 3/12/2012
Very nice tool for popping trim pieces and door panels out.
Pros: Easy to use. Plenty of grip.
Cons: None.
0 of 0 found this helpful
Extreamly useful tool
bmonk80 from Asheville, NC on 3/5/2012
Though probably not necessary it made the job of taking the door panel apart a much easier experience.
Pros: Worked like a charm getting my door panel off
Cons: A little pricey for a piece of stamped sheet metal
1 of 1 found this helpful
Door Panel remover
Bob from Florida on 1/23/2012
While this might be a great tool, I'm disappointed that Clutchfield added it to my order when it won't work on my 2003 Dually. No need for it at all. There are no tabs to pop.
Pros:
Cons:
1 of 1 found this helpful
Totally Unnecessary
Dave from Hammond, LA on 1/20/2012
I go to Crutchfield in large part because they're very thorough when it comes to helping inept self-installers like me. The flip side of that coin, though, is that they can easily over-equip somebody who doesn't know ahead of time what some of the "recommended accessories" are for. This Dash faceplate removal tool is not some sort of ultra-specific piece that comprises the only way I could've loosened the dash panel front on my Silverado (I figured when I included it in my order that it was); the task it performed could just as easily been performed by the putty knife/spackle spreader I have in my tool box (as well as by any of my wider chisels, or even a kitchen spatula). Don't waste your money; spend it on components, then head to the kitchen drawer for a spatula when it's time to install.
Pros:
Cons:
3 of 3 found this helpful
Good tool but not needed
M Miller from Tennessee on 11/1/2011
Well...ordered some Polk speakers and was told I needed this product and did not. I will keep for use in my other car.
Pros: Tool is made well, seems to be good quality
Cons: Did not need
1 of 1 found this helpful
Regrets!
Paradyne from Alaska on 10/20/2011
My only regret is that I wish I would have purchased/used this before trying the flat head screw driver (even wrapped it in a small cloth!) This leaves no marks at all!
Pros:
Cons:
1 of 1 found this helpful
Great tool for not breaking your door panels!
Atomic Tommy from Tracy CA on 10/18/2011
Really helps to distribute the force needed to pop the panel clips loose. I remember back in the day the pressboard door panels that would easily break without a tool like this. Buy it! End the frustration.
Pros:
Cons:
1 of 1 found this helpful
S&G Tool Aid 87650
Tom Ben from Barto PA on 10/13/2011
1 of 1 found this helpful
Nice tool to have
Byron from Clearwater, FL on 9/27/2011
I bought this tool with my new speakers and I was glad I did. It really helped me get the door panels off without damaging anything. And now I have it for any other reason I may need to remove door panels.
Pros:
Cons:
1 of 1 found this helpful
S&G Tool Aid 87650
Crutchfield customer from Northern Virginia on 8/28/2011
0 of 0 found this helpful
Works well
DuaneB from Manassas, VA on 8/10/2011
This little tool works. I was able to remove my door panel and not break anything thanks to this tool and Crutchfield's step by step insturctions. And I was able to get the door panel right back on and it feels and looks like no one has touched the door. It looks like a professional did the work. A must have tool if you are going to remove your door panel.
Pros:
Cons:
1 of 1 found this helpful
S&G Tool Aid 87650
roystd1 from Memphis, TN on 4/19/2011
0 of 0 found this helpful
Handy
Tennessee Tom from Auburn, AL on 3/21/2011
Good for prying up large panels without tearing up plastic connectors, but didn't absolutely need it for my speaker installation. Could come in handy for a vast variety of tasks, though.
Pros:
Cons:
0 of 0 found this helpful
Excellent Recommendaton and time/money saver!
taylor from VA on 3/6/2011
A real time saver when removing the door panel. Thanks Crutchfield, for recommending I buy this rather than the speaker baffles! The baffels wouldn't've worked, as the windows would have crushed them as they cranked down!
Pros:
Cons:
0 of 0 found this helpful
gmc sierra 2
bill from md on 2/21/2011
Good to have for the rear doors! Take your time with this tool on the Sierra rear panels and you will have 0 problems.
Pros:
Cons:
0 of 0 found this helpful
Toyota door panel tol
Redlinerl20 from Dayton, OHIO on 2/9/2011
YOU will need this tool to take of your door panel for a Toyota Matrix. If not you will break all the clips. You must also be careful when opening the small plastic cap that is located in the door handle area. There are 2 screws to remove first before the door panel can be taken off.
Pros:
Cons:
0 of 0 found this helpful
panel tool
Eric L from South Carolina on 11/26/2010
This is not something I would have purchased if I took the time to view it first. (my fault) It is metal and will easly scratch panels if not very careful. Also it was way to thick to get between my dash panel. I used a plastic dart and panel tool that work great.
Pros:
Cons:
1 of 1 found this helpful
not mandatory, but well worth the price
ekorby02 from Hailey, ID on 7/21/2010
I ordered this along with my door speakers in case I needed it. Only the rear doors uses this tool and I still broke a clip, but for the price, I would still recommend getting this tool.
Pros:
Cons:
0 of 0 found this helpful
Panel Removal Tool
William from Florida on 9/23/2009
I bought this when I decided to redo the receiver and speakers in my 1993 Ford F-150 but I didn't even need it, but when I get to replacing my shot speakers in a 02 Silverado I think it would come in handy; at least I hope I get to use it.
Pros:
Cons:
0 of 20 found this helpful
Lifesaver !!!
Glenvall from Batesville, Arkansas on 6/6/2009
This tool helped me save every single locking tab on all 4 doors and also door sills and kickpanels. Love it and would recommend it to anyone !!! Rock On !!!
Pros:
Cons:
2 of 2 found this helpful
Very useful but should cost 50% less
Joe from Scottsdale, AZ on 6/1/2009
It's a very functional tool that saves you some possible headaches from damaging your trim or ripping fasteners. It made the removal of my door trim and other trim items quick and easy. It really should only cost about half this much since it's just stamped metal as a previous reviewer pointed out.
Pros:
Cons:
1 of 1 found this helpful
Excellent tool
John from Snohomish, Wa on 5/27/2009
This tool is cheap and effective and all you need to get the door panells off. I did use another reviewers advise and duct tape the ends so I would not scratch my paint.
Pros:
Cons:
1 of 1 found this helpful
Handy Tool
alanhawaii from Hilo, HI on 5/18/2009
This is one of those tools that you can do the job without but it makes things easier. My justification was that I was saving money doing it myself so why not make it as easy as possible. I did put a piece of duct tape on the back of the tool so I wouldn't scratch any paint when prying off the front door panels. This tool helps you quickly pry off the panel with less risk of breaking any of the fasteners.
Pros:
Cons:
5 of 5 found this helpful
Unnecessary
Alan from Tipp City Ohio on 4/30/2009
I ordered replacement speakers for my 2007 Ford Focus sedan. I assumed (yeah, I know) that the tool would be necessary to remove the door panels. It wasn't. The door panels only require a T15 torx, a 1/4" socket and a small flat screwdriver. So, do yourself a favor and look at your door panels to make sure you really need this thing.
Pros:
Cons:
2 of 13 found this helpful
You need this
Paul from North Jersey on 4/21/2009
Works well. Some type of notched pry-blade is essential to pop doors without damage. But could be a bit smaller, less over-packaged, and HALF THE PRICE. Or 50%-off (not 10%, a lousy buck) with any order over a hundred bucks (not just "select radios").
Pros:
Cons:
1 of 1 found this helpful
S&G Tool Aid 87650
mike from San Diego on 4/14/2009
1 of 3 found this helpful
Does what it's designed to do - but cost too much
Joel from Chesterfield, VA on 2/26/2009
Great tool - saved lots of headache and time - but I agree with previous posts, should cost no more than $5. It's a stamped out piece of metal.
Pros:
Cons:
1 of 1 found this helpful
S&G Tool Aid 87650
Charles from Rancho Cucamonga, CA on 2/6/2009
A bit pricey for what it is, but it is an ingenious little tool. I've never had such an easy time poppin' off door panels.
Pros:
Cons:
1 of 1 found this helpful
S&G Tool Aid 87650
K1500 from Birmingham, Alabama on 1/27/2009
This works very well, and better than a screwdriver because it better distributes the force you put on it (making it less likely to crack or damage a panel) and has a better grip. However, it is quite pricey for just a piece of metal. $4.99 would be more reasonable.
Pros:
Cons:
1 of 1 found this helpful
Worked very well for me.
Ryan from Philadelphia, PA on 11/15/2008
I used this tool to pop the door panels off of my 2001 Monte Carlo. Made removal a breeze. I used it in conjunction with Multiwedge 3600 set, and the door clips popped right off without breaking, and without scratching the paint or the plastic.
Pros:
Cons:
1 of 1 found this helpful
A little advice
AudioChik from Fairfax, VA on 3/21/2008
This tool does work great for most applications. A tip I learned from a former co-worker was to get some electrical tape and tape up the parts of the tool that may scratch the paint where you are trying to pry pieces off. If it is too thick to fit in small places, use your screw driver until you can fit this tool under the panel. I only recommend using a screwdriver if you have patience because you can end up popping a hole right through your panel.
Pros:
Cons:
8 of 9 found this helpful
Does the job.
Billy from Bartlett, TN on 10/29/2007
I got this because Crutchfield recommended it and I had never removed the door panels in my car before. This definately makes the job easier with less worry over damaging anything.
Pros:
Cons:
2 of 2 found this helpful
Scratches big time
kevin from Houston, TX on 4/3/2006
I bought one of these to use on my last install and the other reviewer is correct. It is large and thick. Becuase it is so thick, I found that it scratches the paint everywhere you shove it under the panel. I've found a screwdriver with some electrical tape on it to be a much safer method for popping a panel. That said, it does what its supposed to do, so 3 stars.
Pros:
Cons:
22 of 22 found this helpful
Not Useful
Ed from Washington on 2/5/2006
I bought this tool because I have a fairly new car and the idea of taking it apart was pretty frightening. As it turns out, this thing is just too bulky to really fit in anywhere. Also, the prying tip is about as fat as a screwdriver anyway, so you can't even wedge it between anything. I ended up using my screwdriver to take out all of the panels (and didn't break anything), so buying this thing was kind of a waste.
Pros:
Cons:
23 of 25 found this helpful
S&G Tool Aid 87650
don_effonefifty from MO on 10/24/2005
Yeah, what he said ^^^^. Used it on the door panels on a '93 Explorer (12-year-old composite woodstuff - kinda scary) and they survived the speaker change 100%. Simple little tool, but very much worth the $ if you want your your interior to stay intact.
Pros:
Cons:
18 of 19 found this helpful
The right tool for the right job.
Rye from Central California on 2/6/2005
I've never removed a door panel on any car before so I bought this item - and it worked great! Don't with run the risk with a flat head screw driver of creating a stress riser (which may crack the panel) if you exert too much force on the door panel. This tool is broad and flat so it easily slides between the panel and door and will not damage the panels. If you are a first timer at removing your door panels (to replace speakers, dynamat, etc), I HIGHLY recommend picking this up. It's inexpensive and will make your installation much smoother!
Pros:
Cons:
479 of 602 found this helpful
