About the Niles OS 7.5
Tough indoor/outdoor speakers
Tough indoor/outdoor speakers
Niles OS7.5 speakers are rugged enough to be placed under eaves on the back porch, and good-looking enough to blend into your decor. Each has a 7" woofer for solid bass, plus a 1" fluid-cooled soft dome tweeter for clear, accurate highs. There's an integrated mounting bracket to help with installation, wherever you choose to put them.
- 7" interlaced carbon fiber cone woofer
- 1" fluid-cooled Teteron soft dome tweeter
- frequency response 60-23,000 Hz (±3dB)
- sensitivity: 91 dB
- impedance: 8 ohms
- handles up to 150 watts RMS
- integrated mounting bracket
Dimensions and warranty:
- 8-3/16"W x 13-5/16"H x 9-3/16"D
- warranty: limited lifetime
- Our 60-day money-back guarantee
- MFR # FG00996
What's in the box:
- 2 Outdoor speakers (with metal mounting bracket and two screw knobs installed)
- 2 Shelf stands
- 2 Plastic paint-shields
- Installation Guide
- Limited Warranty card
Niles OS 7.5 reviews
Thanks for submitting your review
More details on the Niles OS 7.5
Features & specs
|Woofer Composition||Carbon-weave polypropylene|
|Woofer Surround||Butyl rubber|
|Power Range (watts)||5-150|
|Frequency Response||60-23k Hz|
|Connector Type||5-way post|
|Mounting Bracket Included||Yes|
|Parts Warranty||Limited Lifetime|
|Labor Warranty||Limited Lifetime|
Indoor/Outdoor Loudspeaker: The Niles Audio OS7.5 indoor/outdoor speakers are designed for outdoor installations, or for use indoors. They come with an integrated mounting bracket for outdoor installations, and a shelf stand for placement on a bookshelf. These high performance speakers are housed in weatherproof enclosures that can handle extreme hot, cold, and moist environments.
Note: The Niles Audio OS7.5 is packaged as a pair.
Weatherproof: Niles Audio OS speakers are designed to exceed the military's strict specifications for preventing corrosion (MIL-STD-883D).
Drivers: Each OS7.5 features a 7" Carbon-weave polypropylene cone woofer and a 1" Teteron dome tweeter. The integrated woofer/baffle design increases the cone area, which enhances the low frequency response. The butyl rubber woofer surround helps damp resonance and provides exceptional durability. The fluid-cooled tweeter has an ultra-wide dispersion pattern to give you clear, detailed high frequencies.
Speaker Terminals: The OS7.5 is equipped with a pair of inverted 5-way binding post terminals, which repel moisture. The terminals can accept up to 12-gauge bare speaker wire, pin connectors, spade lugs, and dual and single banana plugs. For wire runs of less than 80 feet, 16- to 18-gauge wire is recommended. You should use 14-gauge wire for runs of 80-200 feet, and 12-gauge wire for runs over 200 feet.
Paintable: The OS7.5 speakers and removable grilles can be painted to match your décor. Each speaker includes a clear plastic paint mask let you cover the drivers while the paint is applied to the enclosure.
Installation: The speakers can be mounted vertically or horizontally with the integrated bracket, which attaches to the speaker on the top and bottom with easy-to-remove screw knobs. The bracket has a variety of holes for permanent installation by screws or nails. There are also two keyhole slots for easy removal, if desired. The bracket also has a hole for passing through the speaker wire. There is a 1/4"-20 threaded insert on the back for use with 3rd party wall mount brackets.
Shelf Stand: For shelf placement, the OS7.5 comes with a 3-point shelf stand. After removing the bracket, the stand can be secured to the speaker by the bottom screw knob. The shelf stand adds approximately 3/8" to the overall height of the speaker.