Bose® Omni Mount Pendant Kit
Mount a Bose® FreeSpace® 3 Series II system from a high ceiling (White)
Item # 201PMKFSW | MFR # 37084
In Stock
Consult a Commercial Advisor
Our take on the Bose® Omni Mount Pendant Kit by Crutchfield's Eric Angevine
High ceilings? No problem.
If you want to install a Bose® FreeSpace® 3 series II system, but your ceiling is too high for flush mounting, we've got you covered. This kit houses the bass module inside a mounting ring, with up to four satellite speakers secured to the outer edge. The three-point pendant mount securely suspends your system from the rafters, and your customers will be enjoying spot-on sound coverage no matter where they sit.
Get a free system design
Product Highlights:
- suspension mount for a complete Bose® FreeSpace® 3 series II system
- bass module mounts in the center with four satellites secured to the outer ring
- three-point anchoring system for secure system hanging
- warranty: 2 years
- Our 60-day money-back guarantee
What's in the Box:
Bose® Omni Mount Pendant Kit Owner's manual
- Pendant-mount enclosure
- Four 29" sets of speaker wire (pre-installed on enclosure)
- Three 1/2" eye bolts
- Three 12" suspension cables
- Four locking-carabiners (attached to suspension cables)
- Four 1/2" hex-head bolts
- Four flat-washers
- Instruction sheet
Why Shop With Us?12 Reasons.
Hands-on research
Product Research
Features
Overview: The Bose FreeSpace omni pendant-mount kit is a cosmetic cover designed for hanging a complete FreeSpace 3 series II speaker set (an FS 3BF bass speaker with four FS3S satellite speakers) from a single hang-point with open ceilings. The bass speaker sits inside the plastic enclosure and is held in place using the speaker's locking tabs, while each of the four satellites gets attached to one of the four mounting arms around the parameter of the enclosure. The kit includes four 29" sections of speaker wire (pre-attached to enclosure) that link the satellite outputs on the bass speaker to the each of the satellite speakers. The three included eye bolts get tightened into the pre-tapped holes on the bottom of the bass speaker. Each eye bolt then gets attached to a locking carabiner on each of the three suspension cables. These terminate in a single locking carabiner which attaches to an additional cable (not included) suspending the speakers and enclosure from the ceiling.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.