About the Bazooka BT1028DVC
A bass cannon
A bass cannon
Bass makes up about 30% of your music, and it gives music its power and impact. A good subwoofer can make an average car audio system sound good, and a good car audio system sound great. Good bass is all about moving air, and a cylindrical tube translates the motion of its woofer into maximum air pressure so you hear and feel more bass. Bazooka designed the Bass Tube to act like a bass cannon, firing low frequencies throughout your vehicle.
BT1028DVC 10" Bass Tubes® enclosure
The BT1028DVC Bass Tube features a 10" polypropylene woofer with a twin-layer compressed foam surround for smooth excursion. The dual 8-ohm voice coils promote high power handling, and each voice coil has its own set of input terminals to give you maximum hook-up flexibility. The tube design eliminates standing bass waves for accurate response and high efficiency. Find a good spot for a Bazooka Bass Tube in your vehicle and you'll still enjoy plenty of cargo room.
Bass Tubes enclosures fit just about anywhere
A compact Bass Tubes enclosure will fit in almost any vehicle, and you can disconnect it in a snap if you need more cargo space. Since the tube's speaker and port are right next to each other, you can get amazing results by "corner loading" your tube — placing it in a corner of your trunk or cargo area so your vehicle's boundaries act as a natural amplifier, boosting bass production. Want to know more? Take Bazooka's Bass Tubes Tour.
- ported cylindrical enclosure with 10" subwoofer
- includes mounting straps and hardware
- poly woofer with compressed foam surround
- dual 8-ohm voice coils
- 5-way binding post wire terminals
- power handling: 12-500 watts RMS (250 watts per voice coil)
- frequency response: 39-1,000 Hz
- sensitivity: 104 dB
- 10-3/8"W x 12-1/2"H x 21-9/16"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # BT1028DVC
What's in the box:
- One 10" tube-style subwoofer with attached grille
- Two 45" mounting straps (each strap has an attached plastic mounting base)
- 4 Self-tapping screws
- Installation Manual
Bazooka BT1028DVC reviews
Thanks for submitting your review
More details on the Bazooka BT1028DVC
Features & specs
|Woofer Size (inches)||10|
|Speakers Per Box||1|
|Pieces in System||1|
|Second Depth (inches)||N/A|
|Connector Type||5-way posts|
|Frequency Response||39-1000 Hz|
|Power Range (Watts RMS)||500|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Overview: The BT1028DVC features a water-resistant poly enclosure that houses a 10" poly woofer with a foam surround. The patented Bass Tube enclosure design eliminates bass standing waves for high accuracy, and superior efficiency.
Dual 8-ohm Voice Coils: This tube features dual 8-ohm voice coils that offer flexibility in wiring. When the voice coils are wired in parallel with each other, the tube presents a 4-ohm mono load. When the voice coils are wired in series with each other, the tube presents an 16-ohm mono load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 8-ohm load. Each coil can handle 250 watts RMS, so the combined power handling is 500 watts RMS.
5-Way Binding Posts: The 5-way binding posts will accept bare wire, pin connectors, spade lugs, banana plugs, and dual banana plugs.
Installation: Each mounting strap has an attached mounting base that can be secured to your vehicle using the supplied self-tapping screws. Once the mounting bases are installed, the tube is held in place by the mounting straps. For best results, the tube should be mounted facing into a corner, and there should be 2" to 4" between the woofer and the corner into which the woofer is pointing.
The Bazooka BT1028DVC replaces these items
4 questions already asked