About the Bazooka BT1024DVC
Bazooka Bass Tube enclosed subwoofers offer strong, space-saving bass that's easy to install. Hook up one of these compact tubes to a compatible amplifier with a low-pass filter, mount it in a convenient spot in your vehicle, and experience a new dimension in your music.
The BT1024DVC Bass Tube features a 10" polypropylene woofer with a twin-layer compressed foam surround for smooth excursion. The dual 4-ohm voice coils promote high power handling, and each voice coil has its own set of input terminals to give you maximum hook-up flexibility. The tube design eliminates standing bass waves for accurate response and high efficiency. Find a good spot for a Bazooka Bass Tube in your vehicle and you'll still enjoy plenty of cargo room.
- ported cylindrical enclosure with 10" subwoofer
- includes mounting straps and hardware
- poly woofer with compressed foam surround
- dual 4-ohm voice coils
- 5-way binding post wire terminals
- power handling: 12-500 watts RMS (250 watts per voice coil)
- frequency response: 39-1,000 Hz
- sensitivity: 104 dB
- 10-3/8"W x 12-1/2"H x 21-9/16"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # BT1024DVC
What's in the box:
- One 10" tube-style subwoofer with attached grille
- Two 45" mounting straps (each strap has an attached plastic mounting base)
- 4 Self-tapping screws
- Installation Manual
Bazooka BT1024DVC reviews
Thanks for submitting your review
More details on the Bazooka BT1024DVC
Features & specs
|Woofer Size (inches)||10|
|Speakers Per Box||---|
|Pieces in System||1|
|Second Depth (inches)||N/A|
|Connector Type||5-way posts|
|Frequency Response||39-1000 Hz|
|Power Range (Watts RMS)||500|
|Impedance||2 ohms or 8 ohms|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Overview: The BT1024DVC features a water-resistant poly enclosure that houses a 10" poly woofer with a foam surround. The patented Bass Tube enclosure design eliminates bass standing waves for high accuracy, and superior efficiency.
Dual 4-ohm Voice Coils: This tube features dual 4-ohm voice coils that offer flexibility in wiring. When the voice coils are wired in parallel with each other, the tube presents a 2-ohm mono load. When the voice coils are wired in series with each other, the tube presents an 8-ohm mono load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4-ohm load. Each coil can handle 250 watts RMS, so the combined power handling is 500 watts RMS.
5-Way Binding Posts: The 5-way binding posts will accept bare wire, pin connectors, spade lugs, banana plugs, and dual banana plugs.
Installation: Each mounting strap has an attached mounting base that can be secured to your vehicle using the supplied self-tapping screws. Once the mounting bases are installed, the tube is held in place by the mounting straps. For best results, the tube should be mounted facing into a corner, and there should be 2" to 4" between the woofer and the corner into which the woofer is pointing.