Contact us
Close contact box

Bazooka BT6028DVC

BT Series 6-1/2" Bass Tube® with dual 8-ohm voice coils

Item # 204BT6028

The BT6028DVC Bass Tube features a 6-1/2" polypropylene woofer with a twin-layer compressed foam surround for...

Read more from Crutchfield writer, Dominic D.

Ships from manufacturer

$99.99

About the Bazooka BT6028DVC

A bass cannon

The BT6028DVC Bass Tube features a 6-1/2" polypropylene woofer with a twin-layer compressed foam surround for smooth excursion. The dual 8-ohm voice coils promote high power handling, and each voice coil has its own set of input terminals to give you maximum hook-up flexibility. The tube design eliminates standing bass waves for accurate response and high efficiency. Find a good spot for a Bazooka Bass Tube in your vehicle and you'll still enjoy plenty of cargo room.

A bass cannon

Bass makes up about 30% of your music, and it gives music its power and impact. A good subwoofer can make an average car audio system sound good, and a good car audio system sound great. Good bass is all about moving air, and a cylindrical tube translates the motion of its woofer into maximum air pressure so you hear and feel more bass. Bazooka designed the Bass Tube to act like a bass cannon, firing low frequencies throughout your vehicle.

Bass Tube efficiency

BT6028DVC 6-1/2" Bass Tubes® enclosure

The BT6028DVC Bass Tube features a 6-1/2" polypropylene woofer with a twin-layer compressed foam surround for smooth excursion. The dual 8-ohm voice coils promote high power handling, and each voice coil has its own set of input terminals to give you maximum hook-up flexibility. The tube design eliminates standing bass waves for accurate response and high efficiency. Find a good spot for a Bazooka Bass Tube in your vehicle and you'll still enjoy plenty of cargo room.

Big bass without losing space

Bass Tubes enclosures fit just about anywhere

A compact Bass Tubes enclosure will fit in almost any vehicle, and you can disconnect it in a snap if you need more cargo space. Since the tube's speaker and port are right next to each other, you can get amazing results by "corner loading" your tube — placing it in a corner of your trunk or cargo area so your vehicle's boundaries act as a natural amplifier, boosting bass production. Want to know more? Take Bazooka's Bass Tubes Tour.

Click to Play the Video
From Bazooka: Bass Tube Technology
READ LESS

Product highlights:

  • ported cylindrical enclosure with 6-1/2" subwoofer
  • includes mounting straps and hardware
  • poly woofer with compressed foam surround
  • dual 8-ohm voice coils
  • 5-way binding post wire terminals
  • power handling: 12-300 watts RMS (150 watts per voice coil)
  • frequency response: 39-1,500 Hz
  • sensitivity: 100 dB
  • 6-7/8"W x 8-1/4"H x 18-3/8"D
  • warranty: 1 year
  • Our 60-day money-back guarantee
  • MFR # BT6028DVC
KEEP READINGREAD LESS

What's in the box:

  • One 6.5" tube-style subwoofer with attached grille
  • Two 29" mounting straps (each strap has an attached plastic mounting base)
  • 4 Self-tapping screws
  • Installation Manual

Customer reviews

Loading reviews...

Bazooka BT6028DVC Reviews

Average Customer Review(s):

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

More details on the Bazooka BT6028DVC

Features & specs

General
Woofer Size (inches) 6.5
Speakers Per Box 1
Woofer Material Poly
Enclosure Type Ported
Color Black
Pieces in System 1
Width (inches) 6-7/8
Height (inches) 8-1/4
Depth (inches) 18-3/8
Second Depth (inches) N/A
Connector Type 5-way posts
Frequency Response 39-1500 Hz
Power Range (Watts RMS) 300
Maximum Wattage ---
Sensitivity 100 dB
Impedance 4 ohms
Parts Warranty 1 Year
Labor Warranty 1 Year

Product Research

Features

Overview: The BT6028DVC features a water-resistant poly enclosure that houses a 6-1/2" poly woofer with a foam surround. The patented Bass Tube enclosure design eliminates bass standing waves for high accuracy, and superior efficiency.

Dual 8-ohm Voice Coils: This tube features dual 8-ohm voice coils that offer flexibility in wiring. When the voice coils are wired in parallel with each other, the tube presents a 4-ohm mono load. When the voice coils are wired in series with each other, the tube presents an 16-ohm mono load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 8-ohm load. Each coil can handle 150 watts RMS, so the combined power handling is 300 watts RMS.

5-Way Binding Posts: The 5-way binding posts will accept bare wire, pin connectors, spade lugs, banana plugs, and dual banana plugs.

Installation: Each mounting strap has an attached mounting base that can be secured to your vehicle using the supplied self-tapping screws. Once the mounting bases are installed, the tube is held in place by the mounting straps. For best results, the tube should be mounted facing into a corner, and there should be 2" to 4" between the woofer and the corner into which the woofer is pointing.

Loading accessories...

Customer Q&A

2 questions already asked

Q
What else do I need for install?
[ Jared  Mar 18, 2015 ]
4 answers
A
Hello Jared, Bazooka tubes come with braces and straps to mount them, so all you will need is speaker wire (16 gauge or larger) to connect the tube to a seperate amplifier, since this model is passive. Bazooka tubes have 5-way speaker posts, so they accept bare speaker wire but will also accept banana plugs if you prefer to use those on the speaker wire to allow you connect and disconnect the speaker wire more quickly and easily. The amplifier you use should have a low-pass crossover to allow you to send only bass frequencies to the Bazooka tube. If it doesn't, most aftermarket receivers have a low-pass crossover that can be enabled on the subwoofer output. If neither the amp or receiver have a low-pass crossover, then you'll need to place either an active low-pass crossover before the amplifier or a passive one after the amp. If you don't already have an amplifier, Bazooka also offers powered bass tubes, which require, firstly, an amplifer installation kit for the amplifier in the bass tube and, secondly, speaker wire to connect the amplier in the tube to the speaker outputs of a factory or aftermarket receiver or RCA cables to connect the amplifier in the tube to the subwoofer output of an aftermarket receiver. I hope this helps!
[ ERIN  Mar 19, 2015 ]
A
if you get the amplifier installation kit that's all you would actually needs to finish hooking it up and it is one heck of a good subwoofer
[ MICHAEL  Mar 19, 2015 ]
A
I never got mine to work
[ GABE  Mar 19, 2015 ]
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
[ Krissy  Mar 19, 2015 ]  Staff
Q
Do I need to run a power supply to the battery with this?
[ Nick  Mar 19, 2014 ]
4 answers
A
No, it compliments my factory stereo in my 2007 Lexus lx470. Everything sounds clean and clear!
[ DEAN  Mar 23, 2014 ]
A
Unfortunately I returned this because I found something else that fit my space better. However, I believe it is not a powered sub so it is driven by an external amp. That amp needs power from the battery, but the tube is just hooked to speaker wires coming from the amp.
[ ROBERT  Mar 20, 2014 ]
A
No. Only speaker wires to your amp. This sub is not powered. I bridged my amp and wired the voice coils together.
[ BRIAN  Mar 20, 2014 ]
A
No this is the passive model . only has spkr connections
[ DAN  Mar 20, 2014 ]

Loading articles...

TOP