About the Bazooka MGW1224PT
Louisiana music is all about fat bass, and Bazooka's Mardi Gras Series subs will get your party rolling. The MGW1224PT 12" sub features a rugged poly-infused pulp cone that combines the durability of polypropylene with the warm sound of paper. An oversized foam surround keeps the sub on track when the drums and bass start hitting hard. Dual 4-ohm voice coils give you the flexibility to get more power from your amp or to create a multiple woofer setup.
Bazooka designed the Mardi Gras sub to provide great performance at a reasonable price. A hefty magnet gives you plenty of power handling, while the heat-dissipating design keeps the voice coil cool when you're working your system. Heavy-duty nickel-plated spring posts will accept wiring up to 12-gauge, along with banana plugs and pin connectors. Specially engineered for maximum cone excursion and minimum distortion, these subs fire crucial low frequencies to keep your party music on point.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.
- 12" subwoofer with dual 4-ohm voice coils
- poly-infused paper woofer cone with foam surround
- power handling: 75-450 watts RMS (900 watts maximum)
- frequency response: 20-250 Hz
- sensitivity: 87 dB
- mounting depth: 5-5/8"
- sealed box volume: 1.0 cu.ft.
- ported box volume: 2.0 cu.ft.
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # MGW1224PT
What's in the box:
- One 12" Dual Voice Coil woofer
- Installation manual (English/ French/ Spanish)
Bazooka MGW1224PT reviews
Thanks for submitting your review
More details on the Bazooka MGW1224PT
Features & specs
|Cone Material||Injected polypropylene|
|Ideal Sealed Box Volume (cubic feet)||1|
|Ideal Ported Box Volume (cubic feet)||2|
|Port diameter (inches)||4|
|Port length (inches)||8.65|
|Dual Voice Coil||Yes|
87 dB at 1 watt |
|Frequency Response||20 - 250 Hz|
|Max RMS Power Handling||450|
|Peak Power Handling (Watts)||900|
|Top Mount Depth (inches)||5 5/8|
|Bottom Mount Depth (inches)||6 1/8|
|Cutout Diameter or Length (inches)||11|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Dual Voice Coils: For increased system flexibility, the woofer has two 4 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 2 ohm load. When the voice coils are wired in series, the woofer presents an 8 ohm load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4ohm load.
Kapton Voice Coil Former: The 2" diameter Kapton voice coil former increases magnetic efficiency and effectively dissipates heat, resulting in high thermal power handling.
Extended Pole Piece: The extended pole piece creates a broad magnetic field for superior power handling, precise voice coil control, and low distortion.
Bumped Back Plate: The bumped back plate lets the voice coil reach maximum excursion without bottoming-out.
Venting: The woofer has a rear pole piece vent and side vents that provide maximum heat dissipation for cool operation, resulting in higher power handling and lower distortion.
Nickel-plated Spring Posts: The nickel-plated spring posts will accept pin connectors, single banana plugs, and bare wire up to 12 gauge.
Sealed Box: Bazooka recommends a sealed enclosure volume of 1.0 ft³.
Ported Box: Bazooka recommends a ported enclosure volume of 2.0 ft³ with one 4" diameter x 8.65" long port, resulting in a tuning frequency of 40 Hz.