About the Bazooka Tubbie MT-CL3
What's in the box:
- Two 2-piece mounting clamps
- 2 Wiring harnesses
- 12 Plastic inserts
- 4 Rubber pads
- 4 Screws
Bazooka Tubbie MT-CL3 reviews
The screws provided are very poor quality. I could not get the claps to tighten enough on the tower not to move. The screws broke and I am having to get another pair of clamps. I will be drilling the next set out and thru-bolting them with grade 8 bolts.
Pros: Innovative design without visible wiring.
Cons: Made with cheap bolts that break inside the clamp
1 of 1 found this helpful
More details on the Bazooka Tubbie MT-CL3
Tubbie Clamps: The Bazooka marine Tubbie Clamps offer internal hidden wiring, 360-degree rotation, and quick disconnect. They are universally designed to fit towers with widths of 2.125" up to 3".
Compatibility: These Bazooka marine Tubbie Clamps are only for use with the following Bazooka Tubbie Models - MT8100B, MT8100W, MT8265B, MT8265W, MT81LKB, MT81LKW, MT6100BTA, MT6100BTAL, and PR-PP5 (all sold separately).
Care Instructions: These clamps are designed to perform when exposed to water. However, water build up inside these clamps combined with constant 12 volt power for an extended period of time can cause electrolysis and corrosion to form inside these clamps. When using these Powered Clamps please insure that the 12volt power wire connected to the clamps includes a switch such that 12 volt power can be turned off when the clamps and accessories attached to the clamps are not in use. Additionally, any accessories that are hung from these Powered Clamps should be removed, inspected for water build up, and allowed to dry after having been exposed to excessive water from cleaning, pressure washing, or heavy rain.