About the Bazooka SM104
Ahoy, boating bassheads! Bazooka has "marine-ized" its Bass Tubes for powerful low-frequency impact on the high seas. The SM104 tube boasts a 10" waterproof woofer, gold-plated electrical connections, UV-resistant enclosure, and stainless steel hardware. The tube is tested and certified for marine use by an independent lab.
You can mate this super-efficient tube with a relatively small 2-channel amp in its bridged mode and still get good punch or buy two tubes, feed them lots of power, and really rock the boat! Just strap the tube down with the included nylon composite mounting system you'll get great bass without having to cut or modify your boat.Details:
- efficient UV-resistant ported enclosure
- 10" waterproof woofer
- nylon mounting straps and stainless steel hardware included
- 4-ohm impedance
- frequency response 39-1,000 Hz
- handles up to 200 watts RMS (you must have a low-pass crossover)
- sensitivity 104 dB
- 21"L x 10-3/8"W x 12-1/2"H
- 1-year warranty
What's in the box:
- 1 White marine tube-style subwoofer with attached grille
- 2 White 46" mounting straps
- 2 White mounting plates
- Four 1" stainless steel self-tapping screws
- Installation manual
- Warranty/registration card
- Power handling notice
Thanks for submitting your review
More details on the Bazooka SM104
Marine Grade Construction: The SM104 tube features a 10" waterproof woofer, gold-plated electrical connections, UV-resistant enclosure, and stainless steel hardware. The tube has been tested and certified for marine use by an independent lab.
Woofer Materials: The woofer cone is made of waterproof laminated-paper, and the surround is made of rubber.
Moisture Resistant Enclosure: The enclosure is moisture and UV-resistant for reliable operation in humid and sunny conditions.
Gold-Plated 5-Way Binding Posts: The input terminals are gold-plated to resist corrosion. The binding posts will accept bare wire, spade lugs, banana plugs, dual banana plugs and pin connectors. The posts are recessed into a cup at the end of the tube opposite the woofer.
Mounting Method: There are 2 mounting bases that are made to be attached to your vehicle or boat with the provided 1" stainless steel self-tapping screws. Once the mounting bases are installed, the tube can be placed on the bases and secured with the included mounting straps. For best results, the tube should be mounted facing into a corner, and there should be 2 to 4 inches between the woofer and the corner into which it is pointing.