Name: Kicker 46CSS654
Brand: Kicker
SKU: 20646CS654
Price: 143.96 USD
Availability: InStock
Rating: 4.5 (140 reviews)

Overview

by Crutchfield's

The streamlined speaker system

Kicker consistently prioritizes vehicle fit along with quality in their CS Series car speakers, making them among the most popular we sell. And better fit doesn't come at the cost of better sound — you'll find several cool innovations at work here. Kicker's separate titanium tweeter, driven by a neodymium magnet, delivers your music's highs with control and clarity. The woofer's phase plug helps eliminate distortion, and its UV-treated poly-foam surround equips this Kicker speaker for enduring performance no matter what extremes life in your car door brings.

KEEP READING

The streamlined speaker system

Consistently solid sound

Kicker's 46CSS654 6-1/2" component speaker system serves up stellar sound using a polypropylene woofer for the lower frequencies and a titanium dome tweeter for the highs. Kicker includes a pair of external crossovers with three-level tweeter attenuation for fine-tuning your overall sound. Use an aftermarket car stereo or an outboard amp to enjoy classic Kicker quality with more detail and punch.

READ LESS

Product highlights:

component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
6-1/2" polypropylene woofer with polyester foam surround
3/4" titanium dome tweeter
external crossover network with 3 tweeter levels (0, +3, +6 dB)
handles up to 100 watts RMS (300 watts peak power)
frequency response: 35-21,000 Hz
sensitivity: 90 dB
woofer top-mount depth: 1-13/16"
grilles included
warranty: 2 years
Our 60-day money-back guarantee
MFR # 46CSS654

What's in the box:

Kicker 46CSS654 owner's manual

Two woofers
2 Woofer grilles
Two tweeters (each with 36" Wire attached)
2 Crossovers (each with 35" Input wire/ 35" Tweeter output wire/ 35" Woofer output wire attached)
2 Flush mount tweeter rings
2 Short tweeter mounting nuts
2 Long tweeter mounting nuts
2 Back angled tweeter rings
2 Front angled tweeter rings
2 Angled surface mount tweeter housings
Twelve 1" Screws
Four 5/8" Screws
8 Speed clips
Four 7" Zip-ties
4 Red plastic wire caps
Owner's manual (English/ Spanish/ German/ French)

Reviews

Loading reviews...

Kicker 46CSS654 reviews

Average review:

140 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

Customer photos

Verified customer

Verified employee review

Pros:

Cons:

Have questions for

Crutchfield response

Helpful?

Yes

<< >>

Details

Researched by Crutchfield's Pat M.

Features & specs

General
Speaker Size	6 1/2
Design	2-way
Tweeter Design	3/4" Dome
Impedance (Ohms)	4
Tweeter Composition	Titanium
Woofer Composition	Polypropylene
Woofer Surround	Polyester Foam
Parts Warranty	2 Years
Labor Warranty	2 Years
Specifications
Sensitivity (1W at 1 meter)	90
Sensitivity at 2.83 volts	N/A
Frequency Response	35 - 21k Hz
Minimum RMS Wattage	10
Maximum RMS Wattage	100
Peak Power Handling (Watts)	300
Top-mount Depth (Inches)	1 13/16
Bottom-mount Depth (Inches)	2 3/16
Cutout Diameter or Length (inches)	4 15/16
Mounting Height (Inches)	0.413

The Kicker 46CSS654 replaces these items:

Kicker 43CSS654

Product Research

Features

Polypropylene Woofer Cones: The Kicker CSS-series speakers feature durable polypropylene woofer cones, resistant to the moisture and temperature extremes found in automotive applications.

Ribbed Polyester Foam Surrounds: The ribbed polyester foam surrounds allow extended cone excursion for additional bass output and higher SPL.

Woofer Mounting Applications: Kicker describes these speakers as 6½. With the extended mounting "ears" around the perimeter of the frame, they also fit many 6¾ locations. Because Kicker also makes a dedicated 6¾ in this series (item number 20646CS674) that is typically a better fit, we don't recommend the CSS65 for those applications.

Tweeter Mounting Options: The tweeters come with brackets to allow multiple mounting configurations: flush-mounted, angled flush-mounted (approximately 10°), and angled surface-mounted (approximately 45°).

Tweeter Dimensions:

	Flush Mount	Angled Flush Mount	Angled Surface Mount
Mounting Height	0.275"	0.662"	1.928"
Depth	0.548"	0.705"	0.491" (screw depth)
Frame Diameter	1.968"	1.968"	N/A
Cutout Diameter	1.570"	1.685"	N/A
Frame Width	N/A	N/A	1.887"
Frame Length	N/A	N/A	2.110"

Crossovers: The component system includes passive 2-way crossover networks for a seamless transition between the woofers and tweeters. The slope is 12dB per octave (both high pass and low pass) and the crossover point is 4000 Hz. A switch on each crossover allows you to set the tweeter output; 0 dB, +3 dB, or +6 dB. Each crossover's input and output wires are attached; the 35" woofer output has quick slide terminals that connect directly to the woofer and the 35" tweeter output has bullet terminals that mate to the terminals on the tweeter wires.

Crossover Dimensions:

Length: 4.02" (4.67" including mounting flange)
Width: 2.29" (4.47" including tweeter output level switch)
Height: 1.01"

The Kicker 46CSS654 replaces these items

Kicker 43CSS654

6-1/2" component speaker system

70 reviews

6-1/2" polypropylene woofers with polyester foam surrounds
3/4" titanium dome tweeters
external crossover network with 3 tweeter levels (0, +3, +6 dB)

Accessories

Loading accessories...

Q&A

15 questions already asked

If running these in the front upper and lower and Kicker 46CSC654CS Series 6-1/2" 2-way car speakers in the rear of my 1998 dodge Durango, do I need a 4 or 6 channel amp?

[ Robert Feb 09, 2023 ]

1 answer

This scenario would only call for a 4-channel amplifier. The tweeter and woofer on each respective side of the vehicle will only need one channel per set since each woofer and tweeter is connected to an included crossover box.

[ ZACHARY Feb 09, 2023 ] Staff

Can these be installed without visible modification to the factory grilles on a 2002 Mini Cooper S?

[ John Jul 28, 2022 ]

1 answer

Based on our research, these speakers will fit into the factory locations without visible modifications to the grilles. The tweeters will require some degree of custom mounting, but this should be doable while maintaining the look of the factory tweeter grilles. For more help with selecting speakers for your vehicle, please give us a call at 1-800-324-9695.

[ ZACHARY Jul 28, 2022 ] Staff

I have a 2006 VW Golf 5 GTI and would like to replace the entire factory system with Kicker CSS65 components and power it with an aftermarket amp that's capable of 120rmsx4ch at 4ohms. How would they sound compared to the factory system and how different would the bass be from the Kickers as I was quite content or happy with the factory set already ?

[ Kirby Jan 13, 2022 ]

1 answer

We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.

[ KENNETH Jan 15, 2022 ] Staff

Is the 100watt rms for each or both together?

[ TIMOTHY Jul 08, 2021 ]

1 answer

The watt rating is for each speaker. I had these installed on my harley with a 100x2 amp and they sounded great.

[ BRENT Jul 09, 2021 ]

I JUST GOT THESE KICKERS..NICE..BUT IT SEEK THAT THAT THE TWEETERS DROWN OUT THE BASS AT HIGHER VOLUME.......IS THERE ANYWAY TO ADJUST THE TWEETERA TO CALM THEM DOWN...ALL I HEAR AT HI VOLUME IS A LOT OF????? TINNY SOUND TINM

[ DOUG Mar 04, 2021 ]

Does it matter where I mount the crossover? Which location would be better, 1st- closer to the tweeter and mount under dash or 2nd- under the seat, mount next to the amp?

[ BRADLEY Dec 11, 2020 ]

1 answer

Either location would work. I would go with the most convenient location for installing. You will have two sets of speaker wire to run after the crossover. You would need more wire if mounted next to the amp. I hope this is helpful.

[ KEVIN Dec 11, 2020 ]

What does the switch on the crossover do?

[ Andrew Oct 21, 2020 ]

2 answers

IT changes the slope of the tweeter. -3db, -6db

[ KEVIN Dec 11, 2020 ]

Selects high or low frequency bypass.

[ KC Oct 21, 2020 ]

What size amp do I need?

[ Ronald Jerry Jun 07, 2020 ]

1 answer

I'm driving mine with a JVC 750Bt with theses specs Black Audio Watts Per Channel 50 watts RMS PowerInfo 22 watts Preamp Output Level 4 volts

[ Ubaldo Jun 07, 2020 ]

2007 GMC Envoy, if I'm getting this set for my front doors, what should I get for my rear doors?

[ Casey May 19, 2020 ]

2 answers

I bought kicker rear door speakers for my truck. I had a Bose system so mine might vary from what you need. Get the advise from an online tech , they all seem to have a good amount of knowledge to share. I have bought 3 sets of stereos and speakers from Crutchfield and have taken advise from the tech reps that have worked out well.

[ DENISE May 19, 2020 ]

The same kickers you have upfront should be fine for the doors in the back,, hopefully you have the same space available. If that is not enough bass, you have plenty of room to put a sub woofer box in the back.

[ Tom May 19, 2020 ]

Do I need to re-wire the speakers and tweeters using this cross over, or can I just hook up the speakers and tweeters to the existing wiring in my 2010 Honda Ridgeline?

[ Toxicity Apr 23, 2020 ]

5 answers

If this means the 2010 Ridgleine has separates already I'd say go for it. A crossover is a crossover is a crossover. What you don't wanna do is omit the crossover and smoke your tweeters with mid frequency. As long as your resistance is the same I don't know if I'd see an issue with it. I have these in my work van and they sound awesome with the supplied crossover- just food for thought if thew main speaker feed is anywhere near your mids, throw it in there!

[ Shane Apr 26, 2020 ]

They go directly to the factory wiring

[ Dane Apr 23, 2020 ]

I would rewire, because I'm not sure if your ridgeline is wired with the correct values used by the crossover box or not. Using factory wiring you could be running straight, full frequencies to each speaker 8nstead of running through the crossover box like you should... best to rewire and send the correct frequencies. Hope that helps

[ ROBERT JOHN Apr 23, 2020 ]

You can use the existing wiring from your factory head unit. However, to get the full performance out of these mid range component speakers, you would need an aftermarket head unit and amp. Unless the factory speakers in your Honda are blown, I wouldn't waste your money on new speakers unless you are upgrading head unit and amp.

[ DEVIN Apr 23, 2020 ]

I would recommend using the Kicker x-over.The factory setup most likely has a very basic x-over mounted on the tweeter if any all, and the mids would have none. The x-cover can be placed in a location mid point between the speaker (Under dash) and tied into factory wiring, or the better choice run your own. Unless you are familiar with the wiring of your vehicle and know how it ties into radio, its best to run your wiring. Hope this helps! Good Luck!

[ JAMES Apr 23, 2020 ]

Are these good speakers to pair with a subwoofer?

[ Logan Jan 30, 2020 ]

2 answers

Yes, I'm very happy with these installed in a 2008 Scion xB, front doors. Rear doors have Kicker 46CSC654 speakers. 2X Kicker CompR 10" Subs. Kicker 700.5 Amp. Pioneer DVD Head-unit.

[ JOSEPH D Jan 30, 2020 ]

Yes, great mid bass for the price. I suggest putting them on a separate amp though.

[ DEVIN Jan 30, 2020 ]

How's the bass? Compared to factory speakers

[ Josue Jan 15, 2020 ]

5 answers

Bass is noticeably stronger than stock speakers. Perfect for Amplified or non amplified. Would recommend amplified as you get higher quality and more sound.

[ Brenden Jan 16, 2020 ]

I see several people asking about the bass. Our 4runner install we already have 2-10" JBL Subs in the rear and a new Jensen head unit. Obviously the kicker's components will not do what the subs will do. Between the head unit, sub amp, and component speaker amp we have a lot of control over what we want to hear. I chose to make some mounting plates for the tweeters to go into the factory locations and was able to mount the crossovers near the tweeters inside the door.

[ MATTHEW Jan 15, 2020 ]

They are much better. The factory speakers were 15 years old and had visibly deteriorated. We also installed an amplifier to run these speakers, so the difference is pretty dramatic.

[ MATTHEW Jan 15, 2020 ]

I changed everything in my son's acura rsx and what a difference. Bass is great. Crisp high and mid.

[ SCOTT Jan 15, 2020 ]

Depends on what you are replacing. Mine went into a 2012 Ram 1500, replacing factory 6x9s. I am running them off an amp as opposed to off an indash, so the bass is far superior to the OEM speakers. I have heard them when run on an aftermarket indash as well, and even then it sounded more controlled than the OEM.

[ MARK Jan 15, 2020 ]

How's the bass?

[ Josue Jan 15, 2020 ]

1 answer

Surprisingly good enough that I'm debating the addition of a sub. My next step is the addition of a Kicker Key and based on the reviews I've read and the type of music I enjoy I think a sub won't be called for in this build.

[ ROBERT Jan 15, 2020 ]

do all of the components mount inside the door in stock location?

[ Matt Jan 03, 2020 ]

3 answers

If the door has both a woofer and tweeter in it, then all of this Kicker component speaker can be installed in the doors. If the tweeter is not in the doors, then that may change the location that the crossover gets installed but the only way to truly know is to look at the specific vehicle for the driver locations and if needed, the layout of the wiring. Feel free to contact an advisor on 1-800-324-9695 to get more information about your specific vehicle

[ JASON Jan 15, 2020 ] Staff

I had to custom mount the tweeter. Th woofer fit in the door with the install kit. The crossover, I was able to mount on the door under the panel. It took a little work, but the end result was worth it. sounds great.

[ KEVIN Jan 14, 2020 ]

Yeah, it was a pretty straight forward install. I ended up using a combination between the new hardware that came with the speakers and the OEM speakers but they worked great.

[ MIGUEL Jan 14, 2020 ]

What foam baffles should I buy with these speakers? I'm not sure what the depth of the woofer speaker is. Thanks

[ MARK Dec 18, 2019 ]

SHOW MORESHOW LESS