About the Kicker 48CWRT104
Big sound from a small sub
Big sound from a small sub
If you're looking for bass for a tight space, Kicker designed their CompRT subs with compact cars, pickup trucks, and ATVs in mind. The low-profile 48CWRT104 10” subwoofer performs just like a full-size sub, but without killing all your cargo space. This high-performance CompRT sub stands less than 3-1/2" tall, so your installation options are wide open. Kicker has redesigned the forced-air cooling system, so this sub will run cooler when you drive it hard (and you know you will).
Made to bring the boom
The 48CWRT104 comes equipped with a rigid injection-molded polypropylene cone that won't flex and cause distortion while you're cranking the bass. Its rubber surround will last through years of heavy use, combining with a special-design back and top plate to give you more excursion (which equals more bass) than other skinny subs.
Made to fit many systems
This sub handles up to 400 watts RMS so make sure you've got a solid amp to power it. You can wire the dual voice coils for either 2- or 8-ohm total impedance, giving you more wiring options when setting up your system. This versatile sub sounds great in sealed or ported enclosures.
Product highlights:
- 10" shallow-mount subwoofer with dual 4-ohm voice coils
- injection-molded polypropylene cone
- rubber surround
- power handling: 400 watts RMS (800 watts peak)
- frequency response: 25-500 Hz
- sensitivity: 84.8 dB
- top-mount depth: 3.4125"
- sealed box volume: 0.4 - 1.25 cu. ft.
- ported box volume: 1.25 - 1.75 cu. ft.
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 48CWRT104
REVIEWS
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the Kicker 48CWRT104

Features & specs
Size | 10 -inch | |
Impedance | 2 ohms | |
Cone Material | Polypropylene | |
Surround Material | Rubber | |
Ideal Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
84.8 dB at 1 watt | |
Frequency Response | 25 - 500 Hz | |
Max RMS Power Handling | 400 | |
Peak Power Handling (Watts) | 800 | |
Top Mount Depth (inches) | 3 1/2 | |
Bottom Mount Depth (inches) | 4 1/4 | |
Cutout Diameter or Length (inches) | 9 1/8 | |
Vas (liters) | --- | |
Fs (Hz) | --- | |
Qts | --- | |
Xmax (millimeters) | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Dual Voice Coils: This woofer features dual 4Ω voice coils, offering wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 2Ω load. When the voice coils are wired in series, the woofer presents an 8Ω load.
Shallow-Mount: Kicker's CompRT series is designed to minimize depth, giving you subwoofer options where standard enclosures don't fit.
Sealed Enclosures: Sealed enclosures provide the most control over a woofer and provide accurate sonic reproduction, making them suitable to all types of music. Kicker recommends sealed enclosures from 0.4 ft³ to 1.25 ft³.
Vented Enclosures: Vented (or ported) enclosures typically provide better overall efficiency than sealed so they are suitable for use with smaller amplifiers, giving you more bass output from a given amount of power. Kicker recommends the following ported enclosures:
- Minimum Enclosure Volume: 1.25 ft³ with a 10" x 2" x 20" slot port
- Maximum Enclosure Volume: 1.75 ft³ with a 10" x 2½" x 20" slot port
Loading accessories...
Customer Q&A
Loading articles...