About the Kicker 44DCWC122
A perfect pair
A perfect pair
If you're thinking of big bass, odds are that you're thinking about Kicker. Their 44DCWC122 loaded enclosure features a pair of 12" CompC subs that will really add some low-end muscle in your music. The rugged ported box was designed as a perfect match for the subs, so you can count on getting maximum performance, no matter what kind of music you prefer.
Two hard-hitting CompC subs
Each 12" CompC sub features a flex-resistant polypropylene cone for hard-hitting lows without distortion, with a ribbed foam surround that promotes long excursion and helps to keep the cones on target. A heavy-duty steel basket provides a reliable foundation for big bass, and extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.
Sturdy medium-density fiberboard ensures long-lasting performance from the enclosure, and the special-design side port enhances bass production without getting sloppy. The enclosure's 2-ohm impedance draws maximum power from your mono amplifier.
- ported enclosure with two 12" CompC subwoofers
- medium-density fiberboard construction covered with carpet
- 2-ohm total impedance
- power handling: 600 watts RMS (1200 watts peak power)
- frequency response: 27-500 Hz
- sensitivity: 99.9 dB
- 32-3/8"W x 16"H x 17-3/8"D1 x 14"D2
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 44DCWC122
What's in the box:
- Vented enclosure loaded with two 12" CompC subwoofers
- 4 Mounting brackets
- Four 1" Pan head screws
- Eight 5/8" Flat head screws
- Owner's manual (English/ Spanish/ German/ French)
Kicker 44DCWC122 reviews
Thanks for submitting your review
More details on the Kicker 44DCWC122
Features & specs
|Woofer Size (inches)||12|
|Speakers Per Box||2|
|Pieces in System||1|
|Second Depth (inches)||14|
|Connector Type||Spring post|
|Frequency Response||25-500 Hz|
|Power Range (Watts RMS)||600|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Wire Terminal: The two 4Ω subwoofers are internally wired in parallel to present a 2Ω load at the single pair of spring post wire terminals. The terminals are mounted on the back of the enclosure and will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.
Port: The slot port is on the front of the enclosure, between the subwoofers.
The Kicker 44DCWC122 replaces these items
9 questions already asked