About the Kicker Q-Class 44QSC674
Premium Kicker coaxials
Premium Kicker coaxials
Kicker has created something special for those in search of a premium sound solution — their QS Series car speakers. Just a glance at these Kicker 44QSC674 6-3/4" 2-way speakers is enough to excite longtime Kicker fans, but of course, it's the sound that matters most. A Kevlar-impregnated polypropylene woofer cone steps up strength and clarity in the midrange and lower frequencies, while the Teteron® dome tweeter delivers all the high-frequency detail. A specialized wave guide on the tweeter along with strategic placement in line with the woofer voice coil enhances phase alignment for an all-round, cleaner sound.
Bring the power
Audiophile-grade external crossovers improve tweeter and woofer performance and allow the possibility of bi-amping. With power handlng up to 100 watts RMS, Kicker brings "front row" excitement to your daily commute.
Q-Class
Kicker Q-Class speakers incorporate cutting-edge technologies and superb construction to deliver an extraordinary musical experience in your vehicle. These products are only sold by select dealers chosen by Kicker.
Product highlights:
- 2-way 6-3/4" car speakers
- Kevlar-impregnated polypropylene woofer cone
- 1" Teteron® dome tweeter
- external crossover network with bi-amping capability and three-level tweeter attenuation
- handles up to 100 watts RMS (200 watts peak power)
- frequency range: 40-20,000 Hz
- sensitivity: 86 dB
- woofer top-mount depth: 2-9/16"
- impedance: 4 ohms
- grilles included
- warranty: 3 years
- MFR # 44QSC674
What's in the box:
Kicker Q-Class 44QSC674 owner's manual
- Two 2-way speakers
- 2 Crossovers
- 2 Grilles
- 2 Ford mounting brackets
- 2 GM mounting brackets
- 2 Toyota mounting brackets
- 2 Crossover input jumpers (installed)
- 2 Thick adhesive backed foam gaskets
- 2 Thin Adhesive backed foam gaskets
- 2 Adhesive backed motor foam discs
- 2 Adhesive backed foam strips
- Eight 10" Zip ties
- Kicker logo badge
- 4 Crimp-on 0.25" Female quick slides
- 4 Crimp-on 0.187" Female quick slides
- 8 Connector insulators
- Sixteen 1" Screws
- Eight 5/8" Screws
- 8 Flat washers
- 16 Speed clips
- Owner's manual (English/ Spanish/ German/ French)
Customer reviews for Kicker Q-Class 44QSC674
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker Q-Class 44QSC674
Features & specs
General | ||
---|---|---|
Speaker Size | 6 3/4 | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Teteron | |
Woofer Composition | Kevlar impregnated Polypropyle | |
Woofer Surround | Rubber | |
Parts Warranty | 3 Years | |
Labor Warranty | 3 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | 86 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 40 - 20k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 2 9/16 | |
Bottom-mount Depth (Inches) | 2 13/16 | |
Cutout Diameter or Length (inches) | 5 5/8 | |
Mounting Height (Inches) | 0.288 | |
Frame Width | 6.513 | |
Frame Length | 6.513 |
Product Research
Features
Installation Note: In addition to standard 6-3/4 applications, three pair of mounting brackets are included for installation in various special application locations. Please enter your vehicle information to confirm fit.
Point Source Alignment: The recessed dome tweeter uses a point source design; the tweeter is placed in the center of the woofer's voice coil, along with a custom waveguide. The result is improved phase alignment and sonic clarity.
Crossovers: Outboard 2-way passive crossover networks are included for a seamless transition between the woofers and tweeters. The slope is 18 dB per octave and the crossover point is 5.5 kHz.
Bi-amp Inputs: Each crossover has bi-amp inputs, separate inputs for the woofer and tweeter. When using the bi-amp inputs, remove the factory installed input jumpers that short the woofer and tweeter inputs together.
Wiring: The crossover inputs and outputs are screw terminals and will accept bare wire or spade connectors up to 0.325" wide.
Crossover Dimensions:
- Width: 6.27"
- Depth: 2.73"
- Height: 1.62"
Loading...
Loading accessories...
Customer Q&A
4 questions already asked
Loading...
Loading articles...
Very Loud and Clear, best 6 3/4's ever. Well worth the price
Willie from Captiva Island, Florida