About the Kicker Q-Class 41QSS674
Premium Kicker components
Premium Kicker components
Kicker has created something special for those in search of a premium sound solution — their QS Series car speakers. Just a glance at this Kicker 44QSS674 6-3/4" component speaker system is enough to excite longtime Kicker fans, but of course, it's the sound that matters most. A signature Tri-Tech woofer cone steps up strength and clarity in the midrange and lower frequencies, while a Teteron® dome tweeter delivers all the detail of the high range. With power handling up to 100 watts RMS, Kicker brings "front row" excitement to your daily commute.
Versatility is key
You can install these QS Series speakers in the way that works best for your vehicle, either as coaxials or as separate components. As coaxials, the tweeter mounts in the center of the woofer. As components, an aluminum phase plug mounts in the center of the woofer for improved dispersion, and the tweeter can be installed separately with Kicker's included flush- and angle-mounting solutions. Kicker continues the theme of versatility by allowing three-level tweeter attenuation as well as bi-amping via the audiophile-grade external crossovers.
Kicker Q-Class speakers incorporate cutting-edge technologies and superb construction to deliver an extraordinary musical experience in your vehicle. These products are only sold by select dealers chosen by Kicker.
- component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
- 6-3/4" Tri-Tech woofer cone
- 1-3/16" Teteron® Teteron dome tweeter
- can be installed as coaxials or as separates
- external crossover network with bi-amping capability and three-level tweeter attenuation
- handles up to 100 watts RMS (200 watts peak power)
- frequency range: 40-22,000 Hz
- sensitivity: 87 dB
- woofer bottom-mount depth: 2-1/2"
- impedance: 4 ohms
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 41QSS674
What's in the box:
- 2 Woofers
- 2 Phase plugs (installed)
- 2 Woofer grilles
- 2 Woofer trim rings
- Two 1-3/16" Tweeters (each with 6" Wire attached)
- 2 Tweeter mounting posts (installed)
- 2 Crossovers
- 2 Flush mount rings (tweeter)
- 2 Front angle rings (tweeter)
- 2 Back angle rings (tweeter)
- 2 Mounting nuts (tweeter)
- 2 Crossover input jumpers (installed)
- Two +0 dB Tweeter output jumpers
- Two +3 dB Tweeter output jumpers
- Two +6 dB Tweeter output jumpers (installed)
- Twenty 1" Flat head screws
- 12 Speed clips
- Owner's manual (English/ Spanish/ German/ French)
Thanks for submitting your review
More details on the Kicker Q-Class 41QSS674
Features & specs
|Speaker Size||6 3/4|
|Tweeter Design||1-3/16" Dome|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||87|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||40 - 22k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||100|
|Peak Power Handling (Watts)||200|
|Top-mount Depth (Inches)||2 9/16|
|Bottom-mount Depth (Inches)||2 3/4|
|Cutout Diameter or Length (inches)||5 7/16|
Woofer Cones: The woofers use Kicker's Tri-Tech sandwich cone design, a carbon fiber front layer, a foam core center, and a Kevlar rear layer.
Tweeter Mounting Options: The tweeters come with brackets to allow flush-mounting and angle-mounting:
Coaxial Tweeter Mount: In addition to standard tweeter mounting options, the included tweeter mounting posts let you mount the tweeters directly to the center of the woofers, giving you standard coaxial speakers. When the tweeter is attached to the woofer the mounting height increases to 0.946" (top mount) and the tweeter protrusion increases to 0.742" (bottom mount).
Crossovers: The component system includes passive 2-way crossover networks for a seamless transition between the woofers and tweeters. The high pass slope is 24 dB per octave and the low pass slope is 12 dB per octave. The crossover point is 2.8 kHz.
Bi-amp Inputs: Each crossover has bi-amp inputs, separate inputs for the woofer and tweeter. When using the bi-amp inputs, remove the factory installed input jumpers that short the woofer and tweeter inputs together.
Tweeter Level: Three sets of jumpers are included for setting the crossovers' tweeter output level; 0 dB, +3 dB, and +6 dB. Increasing the tweeter output level is useful when they're mounted off-axis (relative to the listeners).
Wiring: The crossover inputs and outputs are screw terminals and will accept bare wire or spade connectors up to 0.335" wide.
- Width: 7-1/8"
- Depth: 4-1/8"
- Height: 1-3/4"
Q Crutchfield asked: Why did you buy this?