About the Kicker Resolution R13
Here's a high frequency "Resolution" that's easy to keep and hear! Resolution tweeters are a great way to express your upper register. The R13 1/2" semi-dome tweeter is made from Kaladex (polyethylene naphthalate) for bright, shimmering highs.
The R13 handles up to 75 watts RMS, and comes equipped with a 4,500 Hz passive crossover (12 dB/octave) to keep damaging low frequencies from reaching the tweeter. Surface and recessed swivel mounts provide great imaging options.
Details:
- 1/2" Kaladex semi-dome tweeters
- flush- or surface-mountable
- 4,500 Hz in-line crossovers
- power range 8-75 watts RMS
- peak power handling 150 watts
- frequency response 4,500-21,000 Hz
- sensitivity 91 dB
- flush-mount depth 15/16"
- warranty: 1 year
Priced per pair
What's in the box:
Kicker Resolution R13 owner's manual
- 2 Tweeters installed in flush mount housings
- 2 Crossovers with attached 6' input/output leads
- 2 Surface mount housings
- 2 Flush mount clips
- 2 Speed clips
- 2 Self-tapping screws
- 2 Machine screws
- 4 Red butt connectors
- 2 Plastic wire ties
- Manual
- Warranty Registration card
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kicker Resolution R13

Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 1-way | |
Tweeter Design | Semi-dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Kaladex | |
Woofer Composition | NA | |
Woofer Surround | NA | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 91 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 4500 - 21k Hz | |
Minimum RMS Wattage | 8 | |
Maximum RMS Wattage | 75 | |
Peak Power Handling (Watts) | 150 | |
Top-mount Depth (Inches) | 0 15/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 1 3/4 | |
Mounting Height (Inches) | 0.302 |
Product Research
Tweeter Dome Material: Each 3/4" tweeter is made with a Kaladex (polyethylene naphthalate-PEN film) semi-dome that offers crisp, clear high frequency response. Kaladex is a polymer film that is rugged and resistant to environmental extremes.
Neodymium Magnets: This type of magnet produces a strong magnetic field. Since neodymium magnets are so strong, a small neodymium magnet can be used to make a compact tweeter, without sacrificing performance.
Ferro-Fluid Cooled Voice Coils: Each tweeter voice coil is fluid cooled for greater durability.
Tweeter Mounting Options: The tweeters may be flush or surface mounted. The tweeters swivel in the flush and surface housings, so you can control the direction of your high frequencies. The tweeters must be installed using one of the two housings.
Flush Mount (swivel) | Surface Mount (swivel) | |
Mounting Depth | 0.921" | 0.822" (screw depth) |
Mounting Height | 0.302" | 1.063" |
Cutout Diameter | 1.697" | NA |
Frame Diameter | 1.915" | 1.808" |
Crossover Dimensions: L=3.429", W=2.039", H=1.256"
Crossover Type and Specifications: The crossovers contain a 12dB/octave, 4.5kHz high-pass network to prevent low frequencies from being sent to the tweeters.
Inputs/Outputs: The crossover inputs and outputs are bare ended wires.
Loading accessories...
Customer Q&A
Loading articles...