About the Kicker 44VCWC122
A perfect match
A perfect match
If you're thinking of big bass, odds are that you're thinking about Kicker. Their 44VCWC122 loaded enclosure features a 12" CompC sub that'll really put some muscle in your music. The rugged ported box was designed as a perfect match for the sub, so you can count on getting maximum performance, no matter what kind of music you prefer.
Hard-hitting CompC sub
The 12" CompC sub features a flex-resistant polypropylene cone for hard-hitting lows without distortion, with a ribbed foam surround that promotes long excursion and helps to keep the cone on target. A heavy-duty steel basket provides a reliable foundation for big bass, and extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.
Sturdy medium-density fiberboard ensures long-lasting performance from the enclosure, and the special-design side port enhances bass production without getting sloppy. The enclosure's 2-ohm impedance draws maximum power from your mono amplifier.
- ported enclosure with one 12" CompC subwoofer
- 3/4" medium-density fiberboard construction covered with carpet
- 2-ohm total impedance
- power handling: 300 watts RMS (600 watts peak power)
- frequency response: 27-500 Hz
- sensitivity: 95.3 dB
- 17-1/2"W x 16"H x 14-5/8"D1 x 11-7-16"D2
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 44VCWC122
What's in the box:
- Vented enclosure loaded with one 12" CompC subwoofer
- 4 Mounting brackets
- Four 1" Pan head screws
- Eight 5/8" Flat head screws
- Owner's manual (English/ Spanish/ German/ French)
More details on the Kicker 44VCWC122
Features & specs
|Woofer Size (inches)||12|
|Speakers Per Box||1|
|Pieces in System||1|
|Second Depth (inches)||11-1/4|
|Connector Type||Spring post|
|Frequency Response||25-500 Hz|
|Power Range (Watts RMS)||300|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Wire Terminal: The subwoofer's dual 4Ω voice coils are internally wired in parallel to present a 2Ω load at the single pair of spring post wire terminals. The terminals are mounted on the left side of the enclosure and will accept pin connectors, single or dual banana plugs, or bare wire up to 10 gauge.
Port: The slot port is on the left side of the enclosure.
Q Crutchfield asked: Why did you buy this?
1 question already asked