About the Morel CDM 700
Warm up your midrange
Warm up your midrange
Morel has mastered the art of making compact (and beautiful) speakers that will floor you with their sonic capabilities. Morel's CDM700 3-1/2" midrange speakers live up to the legend. Use this as a factory midrange replacement or incorporate it into a custom 3-way component system for seriously premium sound. Just be sure you power it with an outboard amplifier to make the most of Morel's superior speaker technology.
Product highlights:
- 3-1/2" car midrange speakers (pair)
- Acuflex-coated silk dome
- crossovers not included
- handles up to 100 watts RMS (300 watts peak power)
- impedance: 8 ohms
- frequency range: 600-6,000 Hz
- sensitivity: 90 dB
- top-mount depth: 7/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 325060-125
What's in the box:
- Two CDM700 Midrange
- 2 Grilles (installed)
- Six 3/4" Screws
- 6 Speed clips
- 8 Mounting clips
- Four 0.25" Crimp-on female quick slides
- Grille putty
- Installation guide
- Warranty card
- Genuine product verification instructions
Reviews
Customer reviews
Loading reviews...
Morel CDM 700 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Morel CDM 700

Features & specs
General | ||
---|---|---|
Speaker Size | 3 1/2 | |
Design | 1-way | |
Tweeter Design | --- | |
Impedance (Ohms) | 8 | |
Tweeter Composition | --- | |
Woofer Composition | --- | |
Woofer Surround | --- | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 90 | |
Frequency Response | 600 - 6k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 300 | |
Top-mount Depth (Inches) | 0 7/8 | |
Bottom-mount Depth (Inches) | 1 1/8 | |
Cutout Diameter or Length (inches) | 3 | |
Mounting Height (Inches) | 0.55 |
Product Research
Features
Controlled Acoustic Resistance: Car speakers are typically installed in free-air applications, providing minimal acoustic loading. Controlled Acoustic Resistance (C.A.R. Filter) improves the acoustic loading by controlling airflow within the driver, mimicking the effects of an enclosure. This provides greater control over the diaphragm movement for improved bass dynamics.
Midrange Size: The midrange drivers are not a standard size, approximately 3" diameter. They can be top or bottom mounted, and have these dimensions:
- Top mount depth: 0.83"
- Mounting height: 0.55" (0.625" including the grille)
- Flange height: 0.287"
- Bottom mount depth: 1.117"
- Tweeter Protrusion: 0.263"
- Cutout diameter: 2.985"
- Frame diameter: 3.521"
Factory Replacement: If the midrange drivers are mounted in a factory 3½" location, four of the included mounting clips should be used. Because the dome is very delicate, I also recommend using the included grilles.
Crossover: These drivers do not include a crossover, so you'll need to add one to the system if it's not built into your amplifier. Morel recommends a high pass crossover point of 500 Hz and a low pass crossover point of 2.5 kHz, both with a slope of 12 dB/octave.
Loading accessories...
Customer Q&A
1 question already asked
Loading articles...