About the Morel Elate Carbon MM3
An essential component
Don't underestimate this little speaker. Morel's Elate Carbon MM3 3-1/2" midrange driver does a whole lot of heavy lifting, providing accurate response in the all-important range of 90 to 6,000 Hz. The MM3's triple-layered carbon-fiber/Rohacell cone minimizes distortion for the most accurate sound possible. Use it as part of a 3-way component system, and add a subwoofer for serious bass reinforcement. Just be sure you power it with an outboard amplifier to make the most of Morel's superior speaker technology.
- 3-1/2" midrange woofers (pair)
- 3-layer carbon fiber/Rohacell woofer cone with butyl rubber surround
- crossovers not included
- handles up to 120 watts RMS (400 watts peak power)
- frequency range: 90-6,000 Hz
- sensitivity: 87 dB
- top-mount depth: 1-1/2"
- cutout diameter: 3-5/16"
- impedance: 4 ohms
- grilles included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 325153-125
What's in the box:
- 2 MM3 Midrange drivers
- 2 Grilles
- 2 Grille frames
- Eight 3/4" Screws
- 8 Speed clips
- Grille putty
- Installation guide
- Warranty card
Morel Elate Carbon MM3 reviews
Thanks for submitting your review
More details on the Morel Elate Carbon MM3
Features & specs
|Speaker Size||3 1/2|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||85|
|Frequency Response||90 - 6k Hz|
|Minimum RMS Wattage||---|
|Maximum RMS Wattage||120|
|Peak Power Handling (Watts)||400|
|Top-mount Depth (Inches)||1 9/16|
|Bottom-mount Depth (Inches)||1 3/4|
|Cutout Diameter or Length (inches)||3 5/16|
|Mounting Height (Inches)||0.255|
Woofer Cone: Morel describes the MM3 as having a Triple Layer Cone design; two exterior carbon fiber layers sandwiching a layer of Rohacell (a high strength, lightweight foam).
Size Classification: Although Morel calls the MM3 a 3½" speaker, the basket doesn't have a typical 3½" shape or mounting screw pattern. It might fit many 3½" applications, but it's likely new screw holes will have to be drilled.
- Top mount depth: 1.523"
- Mounting height: 0.255"
- Flange height: 0.185"
- Bottom mount depth: 1.708"
- Tweeter Protrusion: 0.07"
- Cutout diameter: 3.254"
- Frame diameter: 3.944"
- Screw Hole Pattern:
- Perimeter: 2.56" (center to center)
- Diameter: 3.614" (center to center)
Crossover: These midrange speakers should not be used without a crossover, which is not included. Morel recommends a high pass crossover point of 450 Hz and a low pass crossover point of 3.3 kHz, both with a slope of 12 dB/octave.
The Morel Elate Carbon MM3 replaces these items