About the Morel MPS 2.150 Limited
Gold-plated sound
Gold-plated sound
If you're looking for high fidelity as well as high power and style, Morel's MPS 2.150 Limited 2-channel amplifier will deliver. Developed to commemorate Morel's 45th anniversary, this sleek amplifier features gold-plated wiring connections, a specially designed internal signal path, low-noise Class AB architecture, low tolerance surface mount electronic components, and computerized thermal control — all to give you the most accurate musical reproduction possible, along with pure, clean power.
High-performance options for high-performance speakers
The MPS 2.150 Limited 2-channel amplifier can power a pair of high-performance speakers with 150 watts RMS each. It can also be used to power a subwoofer with up to 300 watts RMS when bridged in one-channel mode. A unique feature of this amp is that you can select between two voltage modes in order to optimize the outputs for different speakers — High Power for 4-ohm speakers, High Current for 2-ohm speakers, or a 4-ohm sub when the amp is bridged.
Pure signal path
The MPS 2.150 Limited doesn't have any audio filters to alter the purity of the signal being amplified. The amp depends on being driven by a high-quality receiver or digital processor to deliver the cleanest amplified signal possible, with no added coloration or distortion. Separate gain controls for the two channels allow for customized applications, like when powering a tweeter and a woofer in an active setup.
Gold-plated connections
Product highlights:
- 2-channel car amplifier
- High Power mode:
- 150 watts RMS x 2 at 4 ohms
- High Current mode:
- 100 watts RMS x 2 at 4 ohms
- 150 watts RMS x 2 at 2 ohms
- 300 watts RMS x 1 bridged at 4 ohms
- mode selected by repositioning onboard fuses
- Class AB amp technology
- 111 dB signal-to-noise ratio, 0.02% distortion
- no onboard crossover filters
- separate CH 1 & CH 2 gain controls
More info:
- gold-plated wiring connectors
- preamp inputs (0.2-4V)
- speaker-level inputs (0.4-8V)
- require speaker wire to RCA adapters
- feature DC offset or signal sensing turn-on
- wiring, fuse, and hardware not included with amplifier
- 8-gauge power and ground wires and a 40-amp fuse recommended
- 12-11/16"W x 2"H x 6-3/4"D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 803125-100
12 reasons to shop with us
#5
Free instructions &
discounted install gear
The stuff you needto do it yourself.
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the Morel MPS 2.150 Limited
Features & specs
| Performance | ||
|---|---|---|
| RMS Power Output (Watts x Channels) |
150 x 2 | |
| Peak Power Output (Watts x Channels) | --- | |
| Power at 2 Ohms (Watts x Channels) | 150 x 2 | |
| Bridged Power (Watts x Channels) | 300 x 1 | |
| Minimum Impedance Bridged | 4 | |
| Minimum Impedance Unbridged | 2 | |
| Minimum Impedance | 2 | |
| Best Frequency Response | --- | |
| THD at Rated RMS Power | --- | |
| Signal to Noise Ratio | --- | |
| Input Voltage | --- | |
| Features | ||
| Amplifier Class | AB | |
| Low-Pass Crossover Frequency | --- | |
| Low-Pass Slope (dB/octave) | --- | |
| High-Pass Crossover Frequency | --- | |
| High-Pass Slope (dB/octave) | --- | |
| Bass Boost | --- | |
| Bass Boost Frequency | --- | |
| Fan Cooled | --- | |
| Fuse Rating | 40 | |
| Speaker Level Inputs | Yes | |
| Preamp Outputs | --- | |
| Width (inches) | 12-11/16 | |
| Height (inches) | 2 | |
| Depth (inches) | 6-3/4 | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
Loading accessories...
Customer Q&A
Loading articles...
