About the Morel MXR200.4
Crossovers for your Virtus Nano Carbon Series speakers
If you're custom-building a Morel Virtus Nano Carbon 2-way component system and you're not using an active crossover, you'll need a pair of Morel's MXR200.4 crossovers. These crossovers ensure that the speakers in your system receive the right frequencies for premium performance. You can set three different levels for the tweeter to control the overall tone in your vehicle.
- pair of passive crossovers networks for Morel Virtus Nano Carbon components
- designed for use with a 2-way system
- crossover point: 2,200 Hz at 12 dB per octave
- tweeter attenuator with level adjustment -2 dB, 0 dB, or +2 dB)
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 327130-225
What's in the box:
- Two MXR200.4 Crossovers
- Six 3/4" Screws
- Installation guide
- Warranty card
Morel MXR200.4 reviews
Thanks for submitting your review
More details on the Morel MXR200.4
Overview: The MXR200.4 passive crossovers are sold as a pair to cover the left and right channels.
Terminals: Each crossover's inputs and outputs are screw terminal strips (0.32" wide); they will accept bare wire or spade connectors.
Tweeter Output Level: A jumper inside each crossover allows you to adjust the tweeter output level; choose -2 dB, 0 dB, or +2 dB.Crossover Point/Slope: For both high-pass and low-pass, the crossover point is 2.2 kHz. The high-pass slope is 6 dB/octave and the low-pass slope is 12 dB/octave.
- Width: 5.56"
- Height: 1.42"
- Depth: 4.17"