About the Morel MXR250.4i
Crossovers for your Hybrid Integra Series speakers
If you're using Morel Hybrid Integra 2-way coaxial speakers and you're not using an active crossover, you'll need a pair of Morel's MXR250.4i crossovers. These crossovers ensure that the speakers in your system receive the right frequencies for premium performance. You can set different levels for the tweeter to control the overall tone in your vehicle.
- pair of passive crossovers networks for Morel Hybrid Integra speakers
- designed for use with a 2-way system
- crossover point: 2,200 Hz at 12 dB per octave
- two-level tweeter adjustment (-2 dB, 0 dB, or +2 dB)
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 327135-225
What's in the box:
- Two MXR250.4i Crossovers
- Six 3/4" Screws
- Installation guide
- Warranty card
Thanks for submitting your review
More details on the Morel MXR250.4i
Overview: The MXR250.4i passive crossover is designed for use with the Morel Hybrid Integra series speakers. The crossovers are sold as a pair to cover the left and right channels.
Terminals: Each crossover's inputs and outputs are screw terminal strips (0.315" wide); they will accept bare wire or spade connectors.
Tweeter Output Level: A jumper inside each crossover allows you to adjust the tweeter output level; choose -2 dB, 0 dB, or +2 dB.
Crossover Point/Slope: For both high-pass and low-pass, the crossover point is 2.2 kHz and the slope is 12 dB/octave.
- Width: 5.54"
- Height: 1.45"
- Depth: 4.17"