About the Morel Virtus Nano Carbon MM2
Remarkable midrange
Remarkable midrange
Morel has no shortage of surprising solutions for custom installations. One look at the slim Virtus Nano Carbon MW2 midrange speakers and you can understand why they're special. A mounting depth of just 0.37" means this high-performance 2-1/2" aluminum dome fits an array of challenging locations. Use these dynamic speakers as part of a 2- or 3-way component system, and add a subwoofer for serious bass reinforcement. Just be sure you power it with an outboard amplifier to make the most of Morel's superior speaker technology.
Note: Morel does not include a crossover with these speakers. You'll need an active or passive crossover in order to play these speakers without damaging them.
Product highlights:
- 2-1/2" midrange speakers (pair)
- aluminum formed dome
- handles up to 60 watts RMS (100 watts peak power)
- frequency range: 200-5,000 Hz
- sensitivity: 83 dB
- impedance: 4 ohms
- top-mount depth: 7/16"
- cutout diameter: 2-5/8"
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # 325122-125
What's in the box:
Morel Virtus Nano Carbon MM2 owner's manual
- Two MM2 Midrange (with attached 8" length of speaker wire)
- 2 Grilles (installed)
- Eight 3/4" Screws
- 8 Speed clips
- Grille putty
- Installation guide
- Warranty card
Reviews
Customer reviews
Loading reviews...
Morel Virtus Nano Carbon MM2 reviews
Average review:
Thanks for submitting your review
Customer photos
More details on the Morel Virtus Nano Carbon MM2

Features & specs
General | ||
---|---|---|
Speaker Size | 2 | |
Design | 1-way | |
Tweeter Design | --- | |
Impedance (Ohms) | 4 | |
Tweeter Composition | --- | |
Woofer Composition | --- | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 83 | |
Frequency Response | 200 - 5k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 100 | |
Top-mount Depth (Inches) | 0 7/16 | |
Bottom-mount Depth (Inches) | 0 11/16 | |
Cutout Diameter or Length (inches) | 2 5/8 | |
Mounting Height (Inches) | 0.375 |
Product Research
Notes
Size: The midrange drivers are not a standard size; the frame is approximately 3" diameter. They can be top or bottom mounted, and have these dimensions:
- Top mount depth: 0.432"
- Mounting height: 0.375" (0.65" including grille)
- Flange height: 0.2"
- Bottom mount depth: 0.632"
- Tweeter Protrusion: 0.175" (0.45" including grille)
- Cutout diameter: 2.615"
- Frame diameter: 3.032"
Loading accessories...
Customer Q&A
Loading articles...