About the StreetWires DBX3448
Machined from solid brass and coated with Diamond Plate Nickel, the StreetWires DBX3448 power distribution block allows you to connect as many as four amplifiers to a single power source.
Just connect your 4-gauge power cables to one of the three set screw inputs, then run up to four 8-gauge cables to your amplifiers you'll also need to place in-line fuses between the distribution block and your amps. You can also use this block to ground your multi-amp system. Contacts are made of nickel-plated brass for maximum signal transfer. Warranty: lifetime.
StreetWires DBX3448 reviews
Thanks for submitting your review
More details on the StreetWires DBX3448
Overview: This Streetwires DBX3448 Power Distribution Block allows you send battery power to multiple amplifiers. It can also be used to combine the ground wires of multiple amplifiers to a single grounding point.
Materials: This distribution block is made of forged brass for maximum current transfer. The block is mounted in a strong polycarbonite base and clear cover. The slim profile allows you to mount the block in a concealed area.
Inputs and Outputs: This distribution block has three inputs (2 side and 1 rear) that will accept up to 4-gauge wire. The three inputs give you maximum mounting flexibility by allowing you to connect the input wire straight on or to either side. The direct set screw connections provide superior clamping and low resistance. The set screws can be tightened/loosened with a 4mm Allen wrench (not supplied). The block also has 4 front-mounted outputs that will accept up to 8-gauge wire. These set screws require a 3mm Allen wrench.
The StreetWires DBX3448 replaces these items