About the StreetWires PS04RSi
Everything you need for excellent power delivery and signal transfer to your amplifier is contained in this premium quality wiring kit from StreetWires. Choose your kit according to the total RMS power of your amplifiers. (And remember, if you're installing a multi-channel amp, you may need another patch cable.)
This PS04RSi 4-gauge kit includes an RCA patch cable and red power cable it's designed to accommodate an amplifier with a fuse rating of up to 80 amps. StreetWires includes their best power cable (UltraFlow) and a heavy-duty solid brass fuse holder (80-amp fuse included). The RCA patch cables feature ultra-compact connectors (saving you space in those cramped quarters behind the dash) and a built-in remote turn-on lead (saving you time during the installation).
The kit includes the following:
- 18 feet of 4-gauge red power cable with attached ring terminal
- waterproof, in-line, solid-brass fuse holder (with diamond plate nickel finish) installed on power cable with 80-amp AGU fuse
- 5 feet of 4-gauge silver grounding cable
- one 16.4-foot RCA patch cable (clear jacket, silver conductors, with molded black connectors) with built-in remote turn-on wire
- assorted connectors and spade terminals
- six plastic wire ties
- lifetime warranty
What's in the box:
- One 18' Length of 4-gauge power cable in translucent red jacket (with an in-line AGU fuse holder and a 5/16" ring terminal)
- One 5' Length of 4-gauge ground cable in clear jacket with a 5/16" ring terminal
- One 16.4' RCA interconnect cable with turn-on lead
- One 80-amp AGU fuse
- Two 4-gauge spade terminals (one red/one black)
- One red butt connector
- One 18-gauge red spade terminal
- Six 4-1/2" cable ties
- Installation instructions (on back of packaging)
StreetWires PS04RSi reviews
Thanks for submitting your review
More details on the StreetWires PS04RSi
General Overview: This is an amplifier wiring kit that includes the power and ground wiring, RCA patch cord, and accessories required to install an amplifier up to 800 Watts RMS (approximately). It does not include speaker wire.
In-line Fuse Holder: The included in-line fuse holder is waterproof and comes with an 80 Amp AGU fuse. The wire is already installed in the fuse holder, but the fuse is not. The fuse holder is 3.835" Long, 1.874" Wide and 1.025" Tall.
Power/Ground Cables: The 4-gauge power cable is covered with translucent red insulation. The 4-gauge ground cable is covered with clear insulation.
Patch Cord: The included RCA patch cord has an extra wire running along with it for the remote turn-on lead.
Crimp-on Terminal Dimensions:
- Power Ring Terminal (installed): W=0.633", Opening= 8mm (0.315")
- 4 Gauge Spade Terminals: W=0.514", prong spacing 0.257"
- 18 Gauge Spade Terminal: W=0.279", prong spacing 0.145"