About the StreetWires Power Stream PSKA0R
StreetWires Power Stream amp kits provide the insulated power cables, fuses and connectors you need to install your amplifier and add an impressive, professional edge to your installation. You'll get a clean flow of power and a quality connection from the fine-strand, oxygen-free copper cables.
StreetWires designed the PSKA0R amplifier wiring kit as a value-oriented solution for single amplifiers with a rating of up to 2000 watts. Each 1/0-gauge power and ground cable is protected by a durable, Poly Flex jacket, and the cables are finished with nickel-plate ring terminals for a secure connection to your amplifier. StreetWires also includes a blue 18-gauge turn-on lead, a firewall bushing, and assorted connectors and cable ties.
Product highlights:
- 1/0-gauge amplifier wiring kit with power and ground connections
- 18 feet of 1/0-gauge red power cable with nickel-plated ring terminal
- 3 feet of 1/0-gauge copper grounding cable with nickel-plated ring terminal
- in-line fuse holder and 150 amp ANL fuse
- 16 feet of 18-gauge blue remote turn-on wire
- assorted connectors, spade terminals, and wire ties
- warranty: lifetime
- MFR # PSKA0R
What's in the box:
StreetWires Power Stream PSKA0R owner's manual
- 18' Length of 1/0-gauge power wire with red translucent jacket (has ring terminal with 5/16" hole on one end)
- 3' Length of 1/0-gauge ground wire with clear jacket (has ring terminal with 3/16" hole on one end)
- 16' length of 18-gauge blue turn-on wire on a spool
- Clear plastic ANL fuse holder
- 150-Amp "Hi-Amp" ANL fuse (installed in holder)
- Two 18-gauge crimp-on spade terminals
- 18-Gauge red butt connector
- 1/0-gauge rubber firewall grommet
- Installation instructions
Customer reviews for StreetWires Power Stream PSKA0R
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the StreetWires Power Stream PSKA0R
Product Research
Features
General Overview: This is an amplifier wiring kit that includes the power and ground wiring and accessories required to install a high-powered amplifier with a rating of up to 2000 watts. It does not include speaker wire or signal cable.
CCA Power/Ground Cable: The power and ground cables are built from 4256 individual strands of the purest oxygen-free, fine-stranded copper. The cables feature highly flexible Rope-Lay wire construction to prevent kinking and provides more installation options. The Poly Flex insulation offers protection from heat, and chemical reactions from gasoline, battery acid and oil. This 1/0-gauge wire has a temperature rating of 105 degrees Celsius.
In-line Fuse Holder: The supplied in-line ANL fuse holder features an impact-resistant clear housing to protect the fuse while allowing easy fuse inspection. The set screw inputs and outputs accept bare 1/0 gauge wire. It has a mounting base plate and mounts with four screw holes for mounting (screws not provided). The Three-Stage Watertight System utilizes four O-rings for a perfect waterproof seal. The solid machined contacts have a silver-plated finish.
ANL Fuse: The supplied 150-amp ANL fuse is installed in the fuse holder. Be sure the 150-amp rating is adequate for your installation. (ANL fuses are available up to 300 Amps, if needed.)
Accessories: The wiring kit also includes a 16' spool of 18-gauge blue turn-on wire, 2 spade terminals, a butt connector, and a rubber grommet for the vehicle's firewall.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
great install kit except the ground ring hole is to small needs to be bigger for a more wide range of ground locations like seat mounting bolts not just sheet screw locations they dont provide a good enough ground
gold232 from Klawock AK