About the Brandmotion 9002-8848
The Wrangler-cam for aftermarket touchscreen radios
The Wrangler-cam for aftermarket touchscreen radios
Brandmotion's 9002-8848 rear-view camera integrates nicely into the rugged design of your 2007-up Jeep Wrangler and displays everything it sees on your aftermarket touchscreen car stereo with a composite (RCA) video input. The camera's 170-degree wide view and visibility for night driving make it a must-have for the hard-drivin' Wrangler owner. Use it for off-road reversing when you need to watch out for stumps and stuff, or install this cam with optional parking lines activated if you're a town & country driver.
You'll hardly notice it
Brandmotion includes an adjustable neck bracket and camera head extension piece so you can mount the camera between the spokes of a wide variety of rear-mounted spare tires, including aftermarket ones. You'll also find all the wiring harnesses needed to install this camera and connect it to your car stereo.
Installation Note: Some wire splicing may be required, so if this is your first install of this kind, you may want to consider a professional installation.
Note: A rear-view camera provides an additional view when reversing your vehicle. It is intended to be used in conjuction with your rear- and side-view mirrors to give a fuller picture of what's behind you. It is not intended as a replacement for your mirrors.
Product highlights:
- rear-view camera
- adjustable bracket for fitting between varying spoke patterns of factory and aftermarket rear spare tire
- wide-angle camera compatible with aftermarket touchscreen radios in select Jeep Wrangler vehicles via composite (RCA) video connection
- 648 x 488 lines of resolution
- 170° wide viewing angle
- 0.5 Lux minimum for night driving
- warranty: 3 years
- Our 60-day money-back guarantee
- MFR # 9002-8848
What's in the box:
Brandmotion 9002-8848 owner's manual
- Rear-view camera (with attached 25' harness)
- Spare tire mounting bracket (pre-installed to camera)
- Short extension bracket (pre-installed to camera)
- Long extension bracket
- 19" Video/Power harness
- 3 Push-nuts
- 15 Wire-ties
- Molex 22-pin connector
- 18" RCA jumper harness
- 3" Power lead (red)
- 3" Ground lead (black)
- Installation Instructions
Featured video:
Featured review
My jeep is lifted and I have oversized tires. All I could ever see was tire in the rear view. Adding this camera was simple and is great to be able to see behind me when backing up.
Steve from Smyrna, DE
12 reasons to shop with us
#7
In-depth vehicle research
The world's largest car fit database.
REVIEWS
Customer reviews
Loading reviews...
Brandmotion 9002-8848 reviews
Average review:
Thanks for submitting your review
Customer photos
Submit a review and then enter to win a $350 rewards card
Review this product
More details on the Brandmotion 9002-8848
Product Research
Features
Jeep Wrangler Camera Kit: The BrandMotion Jeep Wrangler Camera Kit (9002-8848) allows you to add a rearview camera to select Jeep Wranglers with an aftermarket stereo that features a display monitor and camera input. The camera kit includes a rearview camera, spare tire mounting bracket, wiring harness, and hardware.
Note: This rear-view camera kit is meant as a back-up aid only; never solely rely on the rear-view camera when backing-up. In addition to using the rear-view camera, always look behind you to make sure everything is clear when backing up your vehicle.
Vehicle Compatibility: The BrandMotion Jeep Wrangler Camera Kit (9002-8847) is designed specifically for 2007-up Jeep Wranglers that feature an aftermarket head unit with video monitor and composite video rear-view camera input.
CMOS Backup Camera: The BrandMotion Jeep Wrangler Camera Kit features a CMOS backup camera that delivers 648 x 488 lines of resolution with a 170° wide viewing angle. The CMOS camera has a low-light lux rating of 0.5 for driving at night.
Mirror or Reverse Image: The backup camera can display a "Mirror" or "Reverse" image on your aftermarket in-dash monitor. By default, it will display a mirror image. In order to display a reverse image, you will need to cut the white wire (labeled "Mirror option) in the camera's harness.
Park Assist Lines: The backup camera provides parking assist lines on the screen of your aftermarket display monitor. These parking lines are there to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also 4 color-coded horizontal lines that are used to distinguish how close you are getting to the end of the parking spot - Green (Clear), Orange (Getting Close), Yellow (Very Close), and Red (Stop).
Note: You can activate the Park Assist Lines by cutting the green wire (labeled "Parking Line") in the camera's harness.
Spare Tire Mounting Bracket: The BrandMotion Jeep Wrangler Camera Kit comes with a spare tire mounting bracket to mount the rearview camera inside your spare tire on back of your Jeep Wrangler. The adjustable neck of the spare tire mounting bracket allows you to swivel the neck up, down, left, and right to fit the camera head between the different spoke patterns on varying wheels. Also, included in the kit are two camera head extension brackets (short & long) to work with varying wheel depths. The spare tire mounting bracket is designed to work with both factory and aftermarket wheels for the Jeep Wrangler.
Loading accessories...
Customer Q&A
Q Crutchfield asked: Why did you buy this?
2 questions already asked
Loading articles...
