Your cart
Chat
Contact us
Close contact box
Connect ID #
124 433 239 3
Connect ID #
124 433 239 3
All finished with your chat session?

We’ll email you a transcript of this conversation for your records.

All of our representatives are
currently chatting with other customers.

Please enter your name.  
Please enter a valid email address. Why is this required?
Please enter your US phone number.  

For Tech Support, call 1-888-292-2575

Thank you, !
Our conversation will be emailed to
Chat Advisor Image

Your Advisor,

More about me
Please enter a question  
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  

Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Brandmotion SUTV-8848

SummitView™ rear-view camera for use with aftermarket touchscreen radios in select 2007-up Jeep Wrangler models (JK and JL)

Item # 212UTV8848

Brandmotion's cam displays what's behind you on your aftermarket touchscreen car stereo with a RCA video input.

Find what Fits your vehicle

Brandmotion's cam displays what's behind you on your aftermarket touchscreen car stereo with a RCA video input.

Item # 212UTV8848

Ships free today

In stock
$169.96

Free lifetime tech support

Whenever you need a hand.

Hands-on research

We double check the details on each item.

60-day returns

If you don't love it, send it back.

About the Brandmotion SUTV-8848

Use this Wrangler-cam with your aftermarket radio

Brandmotion's SUTV-8848 rear-view camera integrates nicely into the rugged design of your 2007-up Jeep Wrangler (JL and JK) and displays everything it sees on your aftermarket touchscreen car stereo with a composite (RCA) video input. The camera's 150-degree wide view and visibility for night driving make it a must-have for the hard-drivin' Wrangler owner. Use it for off-road reversing when you need to watch out for stumps and stuff, or install this cam with its handy parking lines if you're a town & country driver.

Use this Wrangler-cam with your aftermarket radio

Brandmotion's SUTV-8848 rear-view camera integrates nicely into the rugged design of your 2007-up Jeep Wrangler (JL and JK) and displays everything it sees on your aftermarket touchscreen car stereo with a composite (RCA) video input. The camera's 150-degree wide view and visibility for night driving make it a must-have for the hard-drivin' Wrangler owner. Use it for off-road reversing when you need to watch out for stumps and stuff, or install this cam with its handy parking lines if you're a town & country driver.

You'll hardly notice it

Brandmotion includes an adjustable neck bracket and camera head extension piece so you can mount the camera between the spokes of a wide variety of rear-mounted spare tires, including aftermarket models. You'll also find all the wiring harnesses needed to install this camera and connect it to your car stereo.

Installing this camera yourself? Here's what you should know.

What does it do? Unless otherwise noted, a backup camera is only intended for use backing up your vehicle. (If you require a front-view or constant rear-view camera, check for that capability.)

What tools and supplies will I need? A panel tool, a wire cutter/stripper, a soldering iron, and a rosin-core solder with heat shrink tubing are recommended, along with whatever tools are needed to remove the radio from the dash.  

How much wiring is required? Wiring instructions vary from camera to camera. Some cameras have power wiring that can only be connected near the radio. Others let you power the camera at compatible reverse lights. In all cases, the camera must be wired for power and ground, the camera's video output must be connected to the radio/monitor, and the radio/monitor must be connected to a reverse trigger in your vehicle. Some radio replacement interfaces supply a reverse trigger wire for the radio -- using that wire to power your camera will damage the interface.

Will the included video cable be long enough? You'll need to route the camera's video cable from its mounting location outside your vehicle into your vehicle's cabin and all the way to the screen in the dash. This often requires drilling a small hole in your vehicle or filing some metal and or plastic. You'll also need to estimate the length of cable needed to run from the camera to the dash, which will not be a straight shot. Each camera's cable length is listed.

Note: A rear-view camera provides an additional view when reversing your vehicle. It is intended to be used in conjunction with your rear- and side-view mirrors to give a fuller picture of what's behind you. It is not intended as a replacement for your mirrors.

READ LESS

Product highlights:

  • rear-view camera
  • designed for select Jeep Wrangler vehicles with aftermarket radios or display monitors
  • adjustable bracket for fitting between varying spoke patterns of factory and aftermarket rear spare tire
  • wide-angle camera compatible with aftermarket touchscreen radios via composite (RCA) video connection
  • includes Jeep 22-pin to RCA cable for connecting to factory radio (requires dealer programming)
  • 648 x 488 lines of resolution
  • 170° wide viewing angle
  • parking lines (not defeatable)
  • 0.1 Lux minimum for night driving
  • warranty: 3 years
  • Our 60-day money-back guarantee
  • MFR # SUTV-8848

What's in the box:

  • Rear-view camera w/attached 22' video cable (terminated in a composite video connector)
  • Spare-tire mounting bracket (installed on camera)
  • 3" Extension bracket (installed on camera)
  • 4.25" Extension bracket
  • 17" Composite video-to-22-pin harness
  • 3 Push nuts
  • 1 Plastic bushing
  • Fifteen 8" wire ties

Customer reviews

Loading reviews...

Brandmotion SUTV-8848 reviews

Average review:

3 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee purchase (What's this?)

Pros:

Cons:

Crutchfield response

<< >>

More details on the Brandmotion SUTV-8848

Russ B.
The Brandmotion SUTV-8848 replaces these items:

Product Research

Features

Jeep Wrangler Camera Kit: The BrandMotion SUTV-8848 Jeep Wrangler Camera Kit allows you to add a rear-view camera to select Jeep Wranglers with an aftermarket headunit that includes a monitor display and a rear-view camera input. The camera kit can be used with virtually any style of Jeep Wrangler spare tire.

Note: This rear-view camera kit is meant as a back-up aid only; never solely rely on the rear-view camera when backing-up. In addition to using the rear-view camera, always look behind you to make sure everything is clear when backing up your vehicle.

Vehicle Compatibility: The BrandMotion Jeep Wrangler Camera Kit is designed specifically for 2007-2018 Jeep Wrangler JK, and 2018-2021 Jeep Wrangler JL models that feature an aftermarket head unit with video monitor and composite video rear-view camera input.

Weather Resistance: The rear-view camera carries an IP68 waterproof rating.

CMOS Backup Camera: The BrandMotion Jeep Wrangler Camera Kit features a CMOS backup camera that delivers 648 x 488 lines of resolution with a wide 170° horizontal and 100˚ vertical viewing angle. The CMOS camera has a Lux rating of 0.1 for low-light conditions.

Park Assist Lines: The backup camera provides parking assist lines on the screen of your aftermarket display monitor. These parking lines are there to assist you when backing up into a parking space, and are not removable.

Spare Tire Mounting Bracket: The BrandMotion Jeep Wrangler Camera Kit comes with a stainless-steel spare tire mounting bracket to mount the rear-view camera inside your spare tire on back of your compatible Jeep Wrangler. The spare tire mounting bracket allows you to adjust the neck up, down, left, and right to fit the camera head between the different spoke patterns on varying wheels. Also, included in the kit are two camera head extension brackets (3" & 4.25") to work with varying wheel depths. The spare tire mounting bracket is designed to work with both factory and most aftermarket wheels for the Jeep Wrangler.

Optional Harness: The SUTV-8848 includes an RCA-to-22-pin harness for connecting the camera kit into a compatible factory video monitor.

Note: If using the optional RCA-to-22-pin harness, the factory system will need to be flashed by an authorized Jeep dealership, or using a Brandmotion Jeep Wrangler Flash Programmer Interface (sold separately).

Loading accessories...

Customer Q&A

Loading articles...

TOP
Compare the sound