About the Phoenix Gold AKIT42 4-gauge Kit
Power and signal connections can make all the difference in how well your new amplifier performs, so make sure you use quality wiring and cables.
The Phoenix Gold AKIT42 wiring kit includes 4-gauge power and ground cables, a stereo RCA audio cable, a fuse holder and fuse, and all the accessories you'll need to connect your new amp including 32 feet of speaker wire. Designed for amplifiers with a fuse rating of up to 60 amperes.
Product highlights:
- amplifier wiring kit with power, ground, and audio connections
- 18-foot red 4-gauge power cable
- 2-foot black 4-gauge ground cable
- 17-foot RCA patch cable
- 16-foot 18-gauge turn-on lead
- 32 feet of 16-gauge speaker wire
- 60-amp glass fuse and clear in-line fuse holder
- assorted crimp-on connectors and wire ties
- warranty: 1 year (no warranty on fuses)
- Our 60-day money-back guarantee
- MFR # AKIT42
What's in the box:
- One 18' length of 4-gauge power wire with translucent red jacket
- One 2' length of 4-gauge ground cable with translucent black jacket
- One 16' length of 18-gauge turn-on lead wire in a blue jacket
- One 17' length of stereo RCA cable
- One 32' length of 16- gauge speaker wire in a clear jacket
- AGU style fuse holder
- Two 4-gauge crimp-on ring terminals
- Two 4-gauge crimp-on spade terminals
- Five 16-gauge spade terminals
- Four 16-gauge female speaker terminals
- 60 Amp AGU fuse
- Four black 4-gauge rubber insulated boots
- Five black 16-gauge rubber insulated boots
- Four red 16 gauge rubber insulated boots
- 1 Red butt connector
- One 0.5" ground screw
- Two 0.75" black grommet inserts
- Ten 6" wire ties
Reviews
Customer reviews
Loading reviews...
Thanks for submitting your review
Customer photos
More details on the Phoenix Gold AKIT42 4-gauge Kit

Product Research
Features
General Overview: This is a single amplifier wiring kit that includes the power and ground cables, turn-on lead wire, interconnect cable, speaker wire and the accessories required to install one amplifier.
In-line Fuse Holder: The in-line fuse holder is waterproof and comes with a 60-AMP AGU glass fuse. The fuse holder's set screw input and output accept bare 4-gauge wire (no ring terminal required). Integrated tabs allow you to mount the fuse holder using optional self-tapping screws. The fuse holder has the following dimensions: L = 3.125", W = 1.6875", H = 1.256".
Note: Each end of the fuse holder screws off for access to the set screws. Only one end of the fuse holder accesses the fuse.
Connectors:
- Two 4-gauge ring terminals and two 4-gauge spade terminals (for use with the power and ground wires)
- Five 16-gauge terminal spades (for speaker wire and turn-on lead connections)
- Four 16-gauge female speaker terminals (to connect speaker wire to your speakers)
- One ground screw (to connect the ground cable to a bare metal portion of your vehicle)
Loading accessories...
Customer Q&A
Loading articles...