About the Gentex ADVGEN20A
Enhance your rear-view
Enhance your rear-view
Minimize the blinding effect of high beams in your rear view. Gentex's ADVGEN20A replacement mirror dims automatically to go easy on your eyes while you're driving. Plus, you'll get at-a-glance temperature and compass readouts.
Installation will require the replacement of your factory rear-view mirror as well as running wire for power and the included temperature sensor. If you have not attempted this kind of job before, professional installation is recommended.
- replacement rear-view mirror with temperature/compass display
- inlaid compass and temperature readout
- automatic dimming and brightening
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # ADVGEN20A
What's in the box:
- Rearview mirror
- 7-Pin Molex plug w/92" power and ground wires
- Temperature sensor w/attached 16.5' wires terminated in pin-ends for 7-pin plug (wire is loomed for the first 5 feet)
- Five 7" wire ties
- Five 5" wire ties
- One 18 ga. wire tap
- One 14 ga. wire tap
- Quickstart guide
Gentex ADVGEN20A reviews
Thanks for submitting your review
More details on the Gentex ADVGEN20A
Overview: The Gentex ADVGEN20A is a rearview mirror designed to replace the factory rearview mirror and provide automatic dimming at night, outside temperature, and a compass. The ADVGEN20A uses the factory mounting base and is compatible with most vehicle's mirror mounts.
Auto-Dimming: The ADVGEN20A has a built-in forward-looking light sensor that will automatically dim the mirror when headlights are detected.
Compass: The Gentex replacement mirror features a small window in the upper right corner of the mirror for displaying the current compass heading as well as the outside temperature. Once the mirror is installed and powered on, a quick calibration sequence will get the compass properly oriented for use.
Temperature: The included temperature sensor gets mounted to the back of the front bumper to provide the mirror with the outside temperature. A 16.5' wire harness that's attached to the sensor gets run to the mirror and is terminated with two pinned wires that get inserted into the corresponding slots on the mirror's 7-pin power/ground harness.
9 questions already asked