About the Code Alarm PROPDL2B Door Lock Kit
Code Alarm's PROPDL2B door lock kit allows you power door locks to two doors in your vehicle. The kit contains two heavy-duty actuators that'll operate the locks on the two doors, plus a control module, wiring, and mounting accessories. Once installed, you'll activate the system with the inside door lever or the vehicle's door key. The system will activate both locks when you engage either lock. Warranty: 1 year.
Important: If you know how to use a multimeter and have experience working with your vehicle's electrical system, you should be able to install this car security equipment. If you're unfamiliar with installing car security equipment, please speak to one of our Advisors before attempting this installation.
What's in the box:
- Control Module
- Control Module mounting bracket (with 5/8" self-tapping screw and flat washer)
- 2 Power door lock actuators (each with an 8" 5-wire harness)
- 2 Connecting rods
- Main wiring harness (short section is 9' and the long section is 15.5' in length)
- 10" Remote control input harness
- 2 Metal mounting straps
- 2 Flexible rubber tubes
- 2 Actuator hardware packs (each contains a rod clamp / four 5/8" self-tapping screws / and 2 Speed clips)
- 2mm Allen wrench
- Installation Guide
- Warranty card
- Product Registration card
Thanks for submitting your review
More details on the Code Alarm PROPDL2B Door Lock Kit
Overview: The Audiovox PRO-PDL-2B Power Door Lock kit contains the control module, actuators, and wiring for adding power door locks to two doors in your vehicle. The system can accept a positive or negative trigger from an alarm or keyless entry system (sold separately). The kit can also operate independently, using the action of one door (using the key or operating the door lock lever) to trigger the other door to lock or unlock.
Installation: The kit's control module is mounted near the vehicle's fuse box to allow easy connection to 12V+ and ground wires. The remaining wires are routed through the front door jambs and into the front doors. The kit includes flexible rubber tubes to protect the wires as they pass through the door jamb.