About the Simple Control Simple Cable Complete
This Simple Cable Complete is an infrared emitter cable that gives you remote control of A/V gear placed in an enclosed cabinet. This cable is an add-on for Simple Control infrared transmitters, one of which is required for operation. It's perfect for equipment that doesn't have networking control, giving you menu access for "legacy" components through your iOS® device.
The Simple Cable Complete sends an infrared signal through two output sections — an IR blaster that can control multiple pieces of equipment within line of sight, and two single emitter cables that you place in front of individual components for control. Each emitter and blaster is discrete and selectable within the Simple Control app, letting you control three identical devices independently using the same cable (like three of the same cable boxes in an equipment rack).
- infrared emitter cable for Simple Control infrared transmitters (required for operation, not included)
- provides remote control of legacy equipment through the Simple Control iOS® app
- control multiple pieces of equipment within line of sight
- each emitter and blaster is discrete and selectable within the Simple Control app
- control three identical devices independently using the same cable
- blaster portion of emitter provides device control within a 20- to 30-foot range
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # SCBA050
What's in the box:
- IR cable with two emitters and one high-power blaster (3.5mm plug)
- 6 Adhesive mounts for emitters/blaster
- Setup Guide
Thanks for submitting your review
More details on the Simple Control Simple Cable Complete
Overview: The Simple Cable - Complete works with the three versions of the Simple Control IR Blaster (Wi-Fi, PoE, and Ethernet) to emit infrared commands to the AV devices being controlled by the Simple Control system. The cable features dual IR emitters and a single high-power IR blaster.
IR Blaster/Emitters: The Simple Cable - Complete's high-powered IR blaster can control many devices at once by emitting IR commands to a wide-spread area. The cable also has two smaller IR emitters that can control one device each. You can affix the emitters directly over the infrared port on the target device. The blaster should be positioned within line-of-sight of the IR port of all controlled devices.
Simple Control System: The Simple Control app is an interface that turns your iPhones and iPads into remote controls for your TVs, Blu-ray players, AV receivers, media players, Satellite Receivers (Dish, DirecTV, TiVo), and projectors. All of the commands found on the original remote are found on the interface. You can also control your streaming devices (Apple TV, Roku, etc.), have access to all of your digital media, control your Sonos speakers, and control the climate and lighting in your home.