About the MTX Vehicle-specific Unloaded Enclosure Dual 10"
MTX vehicle-specific unloaded enclosures preserve all the legroom in pickup trucks and all the cargo space in SUVs. Each enclosure is an acoustically-designed, non-resonant, airtight enclosure, with the correct internal volume to yield optimum bass response from a compatible subwoofer.
So what makes these enclosures different than a standard sub box? MTX designs each enclosure for optimum performance in your specific vehicle's acoustic space. Using state-of-the-art rotational molding techniques, and exotic high-density polyethylene, MTX creates a sculpted masterpiece of a sub box, beautifully finished to blend with your interior. And they sound as good as they look, delivering bass that's tight, accurate, hard-hitting, and way down low.
This enclosure comes without speakers you install two of your favorite 10" Type 1 subwoofers. For best results, MTX strongly recommends using a speaker designed for an enclosure with a volume of between 0.5 and 1.0 cubic feet. The enclosure mounts under the rear jump seat of the 1997-2003 Dodge Dakota club cab truck, replacing the factory tool tray (a molded cutout for your jack is built into the enclosure). Please check with us before purchasing by using the vehicle selector on our site, or calling an Advisor at 1-888-955-6000 to verify fit information.
- custom-fit unloaded subwoofer enclosure
- Type 1 enclosure for two 10" subwoofers
- mounts under the rear jump seat of the 1997-2003 Dodge Dakota club cab truck
- high-density polyethylene construction
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # DDXP201U
What's in the box:
- Custom-fit unloaded dual 10" subwoofer enclosure
- Installation instructions
MTX Vehicle-specific Unloaded Enclosure Dual 10" reviews
Thanks for submitting your review
More details on the MTX Vehicle-specific Unloaded Enclosure Dual 10"
Features & specs
|Number of Boxes||1|
|Number of Speakers Per Box||2|
|Cutout Diameter or Length (inches)||9 3/16|
|Maximum Speaker Depth (inches)||5-1/4|
|Box Volume (cubic feet)||1.8|
|Second Depth (inches)||18-1/2|
|Wood Thickness (inches)||0|
|Speaker Wire Connectors||Spring posts|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
Vehicle-Specific Custom Enclosure: The enclosure mounts under the rear seat of a 1997-2004 Dodge Dakota extended-cab truck, replacing the factory tool kit. The jack must be relocated into new location molded into the Bass Slammer enclosure.
Note: Please refer to the Crutchfield Vehicle Selector to confirm fit for your vehicle.
Enclosure Type: The sealed enclosure features fiberglass construction and fits two 10" subwoofers.
Tools For Installation:
- Phillips head screwdriver
- 6" Ratchet extension
- 10mm Socket
- 1/4" Socket
- 11/32" Socket
- T-50 Torx
- Panel Puller