About the MTX ThunderForm
Crinkled french fries, discarded receipts, old gum wrappers — you probably have everything in the hidden corners of your vehicle except great bass. ThunderForm enclosures fill the nooks and crannies of your vehicle with low tones that stand out, but their factory look blends right in.
MTX engineers evaluate the "sonic signatures" of top-selling vehicles so they can design ThunderForms as custom acoustic matches. Each ThunderForm fits and blends inconspicuously into your vehicle, so you get great bass without losing any space. The high-density polyethylene resin enclosure curbs unwanted resonances from your sub, so you'll hear bass that's tight, hard-hitting, and way down low.
This molded MTX ThunderForm, loaded with a premium-quality 10" Terminator subwoofer, mounts in the trunk on driver side of your 2005-08 Dodge Magnum, and doesn't interfere with access to the spare tire. The enclosure is seamless and airtight, with the correct internal volume to yield optimum bass response from the subwoofer. For the ultimate in thundering bass, drive one with an MTX Thunder amplifier.
- high-density polyethylene resin enclosure
- single 10" 4-ohm Terminator subwoofer
- frequency response 35-150 Hz
- power range 50-200W RMS
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # DMAGW05C10-TN
What's in the box:
- ThunderForm enclosure loaded with one 10" Terminator subwoofer
- Mounting hardware
- Installation instructions
More details on the MTX ThunderForm
Vehicle-Specific Custom Enclosure: This MTX ThunderForm enclosure is specifically designed to fit select 2005-2008 Dodge Magnums. Please refer to the Crutchfield Car Selector to confirm fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded high-density polyethylene resin, which dampens resonance and is rigid enough to resist flexing. It is an acoustic suspension (sealed) chamber.
Mounting Location: This enclosure is designed and molded to mount in the cargo area on the driver's side. It does not interfere with access to the spare tire. Note: The provided dimensions are taken at the widest points of the enclosure. Keep in mind that these enclosures are custom made to fit in this particular vehicle, so the enclosure will fit properly in only one specific location.
Woofer: The ThunderForm enclosure is loaded with one 4Ω, 10" MTX Terminator subwoofer.
Tools Required: The manual provides this list of required tools:
- Powered Screwdriver
- #2 Phillips Head Bit
- 6" Bit Holder Extension
- Socket Wrench
- 10mm Socket
- 7mm Socket
- Wire Cutters
3 questions already asked