About the MTX Amplified ThunderForms
Crinkled french fries, discarded receipts, old gum wrappers you probably have everything in the hidden corners of your vehicle except great bass. ThunderForm enclosures fill the nooks and crannies of your vehicle with low tones that stand out, but their factory look blends right in.
MTX engineers evaluate the "sonic signatures" of top-selling vehicles so they can design ThunderForms as custom acoustic matches. Each ThunderForm fits and blends inconspicuously into your vehicle, so you get great bass without losing any space. They're made of high-density polyethylene resin to curb resonances they deliver bass that's tight, hard-hitting, and way down low. The airtight enclosure provides the correct internal volume to yield optimum bass response.
Built-in 200-watt amp and 10" sub
This amplified ThunderForm comes equipped with a cool-running 200-watt amp that's custom designed to provide optimal power to its 10" FPR subwoofer without straining your vehicle's electrical system. MTX's Electronic Bass Control (EBC) lets you adjust the bass level from the driver's seat. A variety of inputs allow easy integration into your vehicle's sound system, and the included 20' power harness simplifies supplying power to the amp.
Made for your vehicle
This enclosure installs under the rear passenger side seat of your 2001-05 and 2007-10 Ford Explorer Sport Trac. Please check with us before purchasing by using the vehicle selector on our site, or calling an Advisor at 1-888-955-6000 to verify fit information.
- custom-fit powered subwoofer
- enclosure fits under rear passenger side seat
- one down-firing 10" FPR subwoofer
- built-in 200-watt RMS Class-D amplifier
- high-density polyethylene enclosure
- variable low-pass filter (50-150 Hz at 12 dB per octave)
- preamp- and speaker-level inputs
- 20' power harness included
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # FEXST01BK10A-FPR
What's in the box:
- Amplified ThunderForm enclosure loaded with one 10" FPR subwoofer
- Two 20 amp fuses (1 in-line/1 installed in the ThunderForm)
- Wiring harness (20' power lead/3' ground lead and 3' remote turn-on lead)
- Speaker-level to RCA harness
- Electronic Bass Control (wired remote) with attached cable
- Mounting hardware
- Installation instructions
MTX Amplified ThunderForms reviews
Thanks for submitting your review
More details on the MTX Amplified ThunderForms
Vehicle-Specific Custom Enclosure: This MTX ThunderForm enclosure is specifically designed to fit select 2001-2011 Ford Explorer Sport Trac models. Please refer to the Crutchfield Car Selector to confirm fit for your vehicle.
Enclosure: The ThunderForm enclosure is made of molded high-density polyethylene resin, which dampens resonance and is rigid enough to resist flexing. It is an acoustic suspension (sealed) chamber.
Mounting Location: This enclosure is designed to mount under the rear seat on the passenger's side. Note: The provided dimensions are taken at the widest points of the enclosure. Keep in mind that this enclosure is custom made to fit in this particular vehicle, so the enclosure will fit properly in only one specific location.
Subwoofer: This enclosure comes loaded with one 10" FPR shallow mount subwoofer. The woofer has an unusual impedance, specifically designed for the built-in amp, and cannot be replaced with standard MTX models.
Class D Amplifier: The enclosure contains a built-in 200-watt Class D (digital) amplifier that allows RCA or speaker-level input. The amplifier is highly efficient and designed specifically for use with the subwoofers in the enclosure.
Electronic Bass Control (EBC): The EBC is a wired remote and allows you to adjust the bass level from anywhere in the vehicle. Installing the EBC is optional.
Low-pass Crossover: The low-pass crossover point is adjustable from 50 to 150 Hz for a seamless transition between the output of this unit and that of the other speakers in the vehicle.
- Gain Control: rotary control; set the gain of the amplifier is match the input
- Crossover Control: rotary control; adjust the crossover from 50 to 150 Hz
Auto Turn-On Feature: When speaker level inputs are used, the system will automatically turn on and off with the radio.
Note: The auto turn-on feature does not operate when preamp level inputs are used, connecting the remote turn-on lead is required.
Tools Required: The manual provides this list of required tools:
- Powered Screwdriver
- #2 Phillips Head Bit
- 6" Bit Extension
- 15mm Socket
- Socket Wrench
- 5/16" Wrench
- Wire Cutters