About the MTX RZR-14-SW
Rockin' bass for your RZR
Rockin' bass for your RZR
MTX's RZR-14-SW subwoofer enclosure brings outstanding bass performance to your 2014-up Polaris RZR without taking up too much room. This rugged sub enclosure contains a 10” ported subwoofer that can handle up to 400 watts of power.
Easy to install
Designed specifically for select Polaris RZR models, the enclosure/sub combo mounts directly under the dash using existing mounting locations, so you won't have to worry about cutting or drilling into your RZR. There's an integrated waterproof harness, too, so you can connect this sub to an MTX MUD600-1 mono amp with minimal hassle. For max performance and minimal vibration, MTX adds a layer of high-density neoprene at various points on the outside of the enclosure.
Ported or sealed
MTX knows that RZR owners will go pretty much anywhere, including into puddles and streams. If you're planning on getting wet when you're out in the wild, the included Quick Install Port Seal (QuIPS) cover fits over the port opening and keeps water from getting into the enclosure. If you just like the tighter bass you get from sealed enclosures, you can leave it on all the time.
Note: not compatible with RZR XP Pro models
- 10" subwoofer in ported enclosure
- direct fit design with no cutting or drilling required
- mounts behind dashboard on passenger side
- integrated sound damping
- waterproof plug
- factory matched texture
- Quick Install Port Seal (QuIPS) cover fits port opening
- sealed or ported functionality
- power handling: up to 400 watts RMS
- sensitivity: 90.2dB
- frequency response: 28Hz - 130Hz
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # RZR-14-SW
What's in the box:
- 10" Loaded subwoofer enclosure w/attached 14" wire harness
- Port seal (installed)
- 2 Mounting brackets
- One 40mm Torx screw (T40)
- Eight 15mm hex-head screws
- Four 7.5" wire ties
- Owner's manual
Thanks for submitting your review
More details on the MTX RZR-14-SW
Overview: The MTX RZR-14-SW loaded subwoofer enclosure is designed to mount into select 2014-up Polaris RZR vehicles and features a pre-installed MTX 55 Series 10" subwoofer. The subwoofer enclosure is designed for a direct fit with no cutting or drilling required.
|RZR 900 Premium||2020|
|RZR 900 FOX Edition||2020|
|RZR 2 900 EPS||2014-2018|
|RZR 4 900 EPS||2014-2020|
|RZR S 900||2014-2020|
|RZR S 1000||2017-2020|
|RZR S4 1000||2019-2020|
|RZR XP 1000||2014-2020|
|RZR XP Turbo||2016-2020|
|RZR XP Turbo S||2019-2020|
|RZR XP Turbo Dynamix Edition||2018-2020|
|RZR XP 4 1000||2014-2020|
|RZR XP 4 Turbo||2016-2020|
|RZR XP 4 Turbo S||2019-2020|
|RZR XP 4 Turbo Dynamix Edition||2018-2020|
|RZR XP 1000 Trails & Rocks||2019-2020|
|RZR XP 1000 High Lifter||2014-2020|
|RZR XP 4 1000 High Lifter||2014-2020|
- Not compatible with XP Pro model RZRs.
- Not compatible with Polaris heater option (located where the subwoofer enclosure mounts).
10" Driver: The RZR-14-SW features a single MTX 55 Series 10" subwoofer driver with a polypropylene cone and a rubber surround.
Enclosure: The RZR-14-SW subwoofer enclosure features a roto-molded design with factory matched texturing. The enclosure is ported, for a deeper bass response, but includes a QuIPS (Quick Install Port Seal) that can be quickly and easily installed for a sealed enclosure. This provides a tighter bass sound while protecting the driver and enclosure from water and mud ingress. A pre-installed wiring harness terminated in a watertight connector can provide a direct connection to an optional MTX MUD600.1 powersports amplifier (sold separately).
- RMS Power: 400W
- Peak Power: 800W
- Frequency Response: 28-130Hz
- Impedance: 4Ω
- Sensitivity: 83.5dB (1W/1M)
1 question already asked